14 January 2006, 05:08
Bill Mc204 vs 220 Swift
What was the outcome, 200 plus post is more than I care to sift thru.

14 January 2006, 07:08
cummins cowboyall you need to know its whats in my first post, if you have doubts just run it in your ballistic software to verify.
14 January 2006, 08:17
bartschequote:
Originally posted by Bill Mc:
What was the outcome, 200 plus post is more than I care to sift thru.
Well I think there was total penatration because there is one hell of a blood trail.

roger
14 January 2006, 08:25
DigitalDanYep, it looks good on paper all right. Glad we got that all settled.

14 January 2006, 08:35
Savage99Bill,
I never read the topic. Not one word. The title made me laugh though.
I called my buddy in S.C. and he said that his 223's do fine with 40's and who cares anyway? Beat the Swift?

14 January 2006, 11:40
nuteI don’t want to kick off the argument again here so this is just my experience. Never used a swift so not looking to critisize the 220 but I do have a 22/250 and use a .223.
I had a beautiful custom gun made up in Tac.20 and it gets used over the 22/250 at a ratio of about 4 to1. I tried 4 or 5 loads until I found one that will do 1.5 inches at 350 and left it at that. My first two loads were running at 4400+ so backed off the fuel a bit and now its 4200 with a 32gr.
Zeroed at 200 its pretty much point of aim from 0 to 300 for rabbits and foxes ( I lift it a couple of inches at 300), fox is the biggest thing I hunt.
It beats the hell out of trying to figure the hold on my 22/250 and Ive never had a runner with it.
My brother has a .204 in rem700 and he had a devil of a time trying to find a load that worked acceptably. Must have tried 5 powders and 20 loads and its still running under 4000.