THE ACCURATERELOADING.COM SMALL CALIBER FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Remington 7615/Deer Rifle
 Login/Join
 
One of Us
posted
Took the plunge and ordered above rifle and will pick up next week for sure. Will use this coming deer season to cull out a few deer/doe on a hunt club I belong and any good suggestions to best hunting bullet for the 223?? Rifle will be set up w/ Nikon 1.5-4.5 scope but shots will be usually less than 100 yards, open fields or light brush areas, no forrest or heavy timber issues to deal with while shooting.
Looking forward to having this rifle with me a lot this fall/winter while hunting or just cruising the woods and fields for it feels well balanced and seems very handy while walking(muzzle does not drag the ground while holding the grip area of buttstock.) Definitely plan on the cyote population this Spring. Any and all loads/bullets, etc. would be appreciated.
 
Posts: 1165 | Location: Banks of Kanawha, forks of Beaver Dam and Spring Creek | Registered: 06 January 2005Reply With Quote
One of Us
Picture of Dr B
posted Hide Post
The 53gr or 62gr TSX will work like a charm. The accuracy will be great.
Good Hunting
DR B
 
Posts: 947 | Registered: 24 February 2005Reply With Quote
One of Us
posted Hide Post
My 7615P REALLY REALLY likes the 55grn Sierra Gameking stoked with a heavy charge of Varget. This load chronographs an average of 2930 fps from my short 16.5" barrel with average accuracy for 5 shot groups running right at MOA

You'll like your 7615 I know I do. My police version is one of the most constantly accurate rifles I've owned. Easily out shooting many of my bolt actions.



----------------------------------------

If you waste your time a talkin' to the people who don't listen
To the things that you are sayin' who do you thinks gonna hear
And if you should die explainin' how the thing they complain about
Or the things they could be changing who do you thinks gonna care

Waylon Jennings
 
Posts: 329 | Location: NW Arkansas | Registered: 19 February 2006Reply With Quote
One of Us
posted Hide Post
62 or 70gr TSX
 
Posts: 2252 | Location: South Texas | Registered: 01 November 2005Reply With Quote
One of Us
posted Hide Post
Thanks for the input and when I finally get to shoot the rifle, will post results. Again, thanks
 
Posts: 1165 | Location: Banks of Kanawha, forks of Beaver Dam and Spring Creek | Registered: 06 January 2005Reply With Quote
new member
posted Hide Post
I have a 7615 Ranch Rifle coming (18.5" barrel) and I want to get some dies for reloading.
Do you use a small base die for your reloads?...
I'm reloading Barnes X bullets, do you use a factory crimp die?

Thanks
Steve
 
Posts: 10 | Registered: 12 October 2003Reply With Quote
one of us
posted Hide Post
Winchester 64gr power point bullets.


*We Band of .338 ers*.NRA Member
 
Posts: 415 | Location: Milwaukee WI USA | Registered: 07 April 2002Reply With Quote
One of Us
Picture of Snellstrom
posted Hide Post
53 grain TSX is a real killer, that bullet is light enough that you get good velocity in the .223 and the bullet holds together very well. You will always or nearly always get complete pass throughs with devastating damage from the .223 / 53 grain TSX combo. The son of a buddy of mine has killed several whitetails with his .223 and that bullet with not one bullet recovery lots of great kills. I would be reluctant to step up much in weight for the .223 because of the velocity loss. A factory load I get good accuracy with in a Mini 14 of all things is the Ultramax 60 grain Nosler Partition. I haven't tried this on deer but would do it in a heartbeat, I'm anxious to hear reports of others using this bullet and their results, my guess is you would not get full penetration to an exit but I don't think you would have to have that every time ( it is nice though).
Just my thoughts and experiences on the subject.

If loading for a pump or auto I would use small base dies and a light crimp if the crimp helped with the groups size otherwise I would not bother crimping.
 
Posts: 5604 | Location: Eastern plains of Colorado | Registered: 31 October 2005Reply With Quote
One of Us
Picture of seafire2
posted Hide Post
I am a little more traditional, than thinking one needs the premium bullets...

70 grain Speer SMP or the 63 grain Sierra are always a good choice in my book...they open up well and do a lot of damage...

The 60 grain Sierra HP is also a pretty darn effective bullet on deer...particularly at 100 to 150 yds with an MV of 3000 to 3100 out of a 223...

Good luck...
cheers
seafire
beer


Life Member: The American Vast Right Wing Conspiracy

Jan 20, 2009.. Prisoner in Dumocrat 'Occupied America', Partisan in the 'Save America' Underground


Beavis..... James Beavis..... Of Her Majesty's Secret Service..... Spell Check Division



"Posterity — you will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it."
John Quincy Adams

A reporter did a human-interest piece on the Texas Rangers. The reporter recognized the Colt Model 1911 the Ranger was carrying and asked him "Why do you carry a 45?" The Ranger responded, "Because they don't make a 46."

Duhboy....Nuttier than Squirrel Poop...



 
Posts: 9316 | Location: Between Confusion and Lunacy ( Portland OR & San Francisco CA) | Registered: 12 September 2007Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
Sorry I can't contribute any help. Was just shooting my 7615Police today and since I don't reload for .223 I just use anything that is cheap with the price of ammo going up as it is. Mine seems to digest anything I put thru it with no particular preference. Very accurate ,very handy, is rapidly becoming one of my favorite rifles. One question does anyone else notice the the flattening on two sides of the neck on ejected cases? I get this on every case. Ejection is VERY positive and throws the cases quite a distance. Of course I work the slide VERY positively also.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
quote:
does anyone else notice the the flattening on two sides of the neck on ejected cases?


Your rifle has a plunger ejector. As the case is pulled out of the camber the plunger snaps the case neck sideway in to the side of the chamber denting it. M700s will do the same thing.
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
One of Us
Picture of zimbabwe
posted Hide Post
Thanks Ireload2, haven't owned a plunger ejector in many a moon,never even occurred to me. Really like the rifle,might even tempt me into reloading .223.


SCI Life Member
NRA Patron Life Member
DRSS
 
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia