THE ACCURATERELOADING.COM SMALL CALIBER FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
BSA 222
 Login/Join
 
one of us
posted
I got one of these in a trade about 7-8 years ago and always regretted selling it. I was lucky enough to find another last week, it appears to be unfired. This is the early BSA with the mini sized controlled feed action with double square bridges.

Here's a scan of part of the owners manual...

any one else have one of these little mini BSA's?
 
Posts: 588 | Location: Sherwood Park,Alberta,Canada | Registered: 28 February 2001Reply With Quote
One of Us
Picture of Jon2
posted Hide Post
Rembo

I used to have a first pattern Monarch in .270. I think it was built in 1967. The build quality was fantastic. I was going to do a total restoration on it as the dealer (Galloway Guns and Tackle, Newton Stewart - the shop at the bottom end of town) told me it had been in storage in Northern Ireland since the early 70's and the bore was pristine. When I cleaned it properly i found it was severly pitted. When I asked him to take it back he wouldn't (i won't do that again and haven't patronised him since). I subseqently gave up on the project as re-barrelling meant that it wouldn't be true to form if you know what I mean but it still shot 1.5 inch groups at 100 yards. The quality of the rifle as in the bluing and woodwork was exemplorary and reminded me of a Sako 75 Delux or even better.
 
Posts: 596 | Location: Cheshire, England | Registered: 06 March 2005Reply With Quote
One of Us
posted Hide Post
I don't own one....
But, I'd snap one up in a micro-second.
I have two BSA rimfires rifles and they are acuurate, and extremely well made.

Too bad they don't make the 222 any more.

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
one of us
posted Hide Post
The BSA barreled action was imported to the U.S. as the proprietary Herter U-9 and stocked by Herter. Actually, a nice rifle with a dovetailed receiver similar to a Sako or Tikka. I think there were three distinct actions lengths as with the Sako. Your rarely run across them at gun shows, but I have seen a couple.
 
Posts: 13274 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
posted Hide Post
This one has a BSA butt plate as well as an original BSA Owner's Manual printed in England in 1956...I suspect it was completely assembled in England also.
 
Posts: 588 | Location: Sherwood Park,Alberta,Canada | Registered: 28 February 2001Reply With Quote
one of us
posted Hide Post
Me TOO! And mine has all the neat stuff on the barrel about metric ton etc. Good shooter but I think it has a very slight headspace problem as some factory stuff I tried exhibited a flat primer. As handloading is the norm who cares? The ones that were imported by Herters say Herters U-9. The originals like yours and mine all say BSA.
Aloha, Mark


When the fear of death is no longer a concern----the Rules of War change!!
 
Posts: 978 | Location: S Oregon | Registered: 06 March 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia