THE ACCURATERELOADING.COM SMALL CALIBER FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
caliber advice
 Login/Join
 
One of Us
posted
Hey guys
I just got my self a 1-9 twist Lilja 20 cal barrel, question is what should I get it chambered in?
Thanks Greg
 
Posts: 698 | Location: Edmonton Alberta | Registered: 18 January 2005Reply With Quote
One of Us
posted Hide Post
204 Ruger.
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
one of us
posted Hide Post
Depends on the boltface but the 20 VarTarg and 20 PPC would be good choices.
 
Posts: 323 | Location: Northeastern, PA | Registered: 21 June 2002Reply With Quote
One of Us
Picture of Von Gruff
posted Hide Post
Gotta be another vote for the 20 VarTarg. Exceptional cartridge.

Von Gruff.
 
Posts: 2694 | Location: South Otago New Zealand. | Registered: 08 February 2009Reply With Quote
One of Us
posted Hide Post
Have you considered the 20 Tactical? Use quality .223 brass.
 
Posts: 339 | Location: Ohio | Registered: 06 January 2008Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by RyanB:
204 Ruger.
tu2
Stay with commercial standard chamberings.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of sam308
posted Hide Post
Re-bore and chamber for 25ACP.
 
Posts: 344 | Location: Kansas | Registered: 27 July 2008Reply With Quote
One of Us
posted Hide Post
I just had a 20 vartarg made. Shoots exceptionally well, It will be a great PD gun and will take a few called coyotes with it.
One word of caution, if you go with this cartridge and want a repeater, use the right action. I used a sako A1 and it feeds fine. I tried a 221 FB in a 223 Rem model 7, and I had a non repeater. I would use a sako small action, or a Rem that was dedigned for a 221 FB or a 17FB, There are more issues than bolt face size, if you want a repeater. I speak from expensive experience.
Good luck.


NRA Patron member
 
Posts: 2656 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
One of Us
posted Hide Post
Fasteel,

What will you be using the rifle for?
I believe a 1-9 twist is fast for 20 cal, so I would think you would be using "heavy for caliber bullets". If going long range and you're thinking red mist you'll need velocity. A 20-250 would give you the velocity.

I would think a 50 grainer in a vartarg would give you in the neigborhood of 3K fps. Trajectory will not be as flat as a 32 grainer.
GWB
 
Posts: 23752 | Location: Pearland, Tx,, USA | Registered: 10 September 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Geedubya:
Fasteel,

What will you be using the rifle for?
I believe a 1-9 twist is fast for 20 cal, so I would think you would be using "heavy for caliber bullets". If going long range and you're thinking red mist you'll need velocity. A 20-250 would give you the velocity.

I would think a 50 grainer in a vartarg would give you in the neigborhood of 3K fps. Trajectory will not be as flat as a 32 grainer.
GWB


GWB

Just a varmint shooting round. I have an older Sako Vixen in 223 I seldom shoot any more, sounds like this may make a good donor action for this new barrel.
Thanks Greg
 
Posts: 698 | Location: Edmonton Alberta | Registered: 18 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia