THE ACCURATERELOADING.COM SMALL CALIBER FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Painted a couple of Stevens 200

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Painted a couple of Stevens 200
 Login/Join
 
One of Us
posted
I did the first rifle last summer it was my first time toying with a Savage rifle. Bought this Sevens 200 just to build something on. I settled on 6X47/6mm-222RM for the cartridge. I put a Sin Arms 1:12 twist barrel on it #3 contour, 11 degree crown 20" long. SSS competition trigger, recoil lug, and the tactical bolt handle.

I had a ton of 55 grain Nosler BT bullets I couldn't get to shoot in my .243 Win which helped with the caliber decision. Shoots pretty good with 29 grains of H335 and the 55 grain bullets. It is able to stabilize 80 grain Winchester bulk bullets and puts them 6" low from POI of the 55 grain bullets may have to try a pronghorn with this rifle in the fall.

I primed the stock with some NAPA brand automotive plastic primer; and I painted the stock with just a plain textured Forest green paint. Put a couple coats of satin clear on it as well. Going to send it off soon for a black titanium finish on the barreled action.








The next rifle I just picked up a bone stock .223 Rem three Weeks ago. I found it used with a Burris FFII 2-7X35 scope on it. When you factored in the price of the scope it was just too good of a deal to pass up. I did move the scope to my 6X47 and put the 2-7 Monarch on this one, unfortunately can't use the Butler creek flip up on eyepiece because I used shorter rings and the bolt hits the scope cap.

This rifle will probably get the same treatment as the 6X47 as far as the SSS trigger and bolt handle go. I'm not planning on changing out the cartridge so I doubt I'll install the recoil lug since it seems to be a decent shooter already.

I primed the stock again with the same NAPA plastic primer. I found some Gray Stone textured paint to try. It was textured all right, felt like someone glued gravel to the stock. Tried a little sandpaper and it smoothed right out and didn't pull the paint off. Finished again with a satin clear coat.








Should be ready for prairie dogs this summer.
 
Posts: 2242 | Registered: 09 March 2006Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
fishingLooking good! tu2Playing with Mod. 200s has become quite a thing with me. Really pleasantly surprised with some of the barrel quality of E.R.Shaw barrels.Have fun! beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
posted Hide Post
Nice jobs on bof'um! tu2
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
One of Us
posted Hide Post
This seems to be about as good as I get with this 6X47 rifle. Probably need to bed it and that would help the groups.

 
Posts: 2242 | Registered: 09 March 2006Reply With Quote
One of Us
posted Hide Post
Two very nice jobs!

I may try one of those..

was thinking of a 6 x 45 myself on the Stevens Action with a Tactical Bolt and short barrel..
 
Posts: 16144 | Location: Southern Oregon USA | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by seafire/B17G:
Two very nice jobs!

I may try one of those..

was thinking of a 6 x 45 myself on the Stevens Action with a Tactical Bolt and short barrel..


I'd be pretty interested in some Blue Dot loads if you ever do!
 
Posts: 2242 | Registered: 09 March 2006Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by taylorce1:
I'd be pretty interested in some Blue Dot loads if you ever do!
Excellent way to do some Major Metal Reshaping on the old ones. rotflmo
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
one of us
posted Hide Post
I have 5 of the Stevens 200's now and have had a couple more that I sold,,,, painted all the stocks with the Krylon Fusion paint,,,, flat brown, flat Tan or flat OD Green... the flat fusion paints have a good texture and stick very very well to the stocks.

Would really like to rebarrel a 300WM Stevens 200 to 300ruger,,,,I like what I've heard about that round


Location Western NC,,, via alot of other places,
One wife
Two kids
Three Glocks
and a couple cats.


 
Posts: 376 | Location: Western, NC, USA | Registered: 29 April 2004Reply With Quote
one of us
posted Hide Post
Forgot,,, I also lightly sand the stocks with some 120 grit sandpaper before paining, adds a little to the texture and probably helps the paint bond


Location Western NC,,, via alot of other places,
One wife
Two kids
Three Glocks
and a couple cats.


 
Posts: 376 | Location: Western, NC, USA | Registered: 29 April 2004Reply With Quote
One of Us
posted Hide Post
I'm glad you figured out that you could sand that textured "stone" paint. I did an old Jarrett 338 in that paint once, and the finish had the texture of 80-grit sandpaper.
 
Posts: 20177 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
one of us
Picture of Bobby Tomek
posted Hide Post
Very nice! I especially like the Gray Stone.

Do you recall what grit/# of sandpaper you used to tone it down and smooth it up?

Again...nice work. beer


Bobby
Μολὼν λαβέ
The most important thing in life is not what we do but how and why we do it. - Nana Mouskouri

 
Posts: 9454 | Location: Shiner TX USA | Registered: 19 March 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Bobby Tomek:
Very nice! I especially like the Gray Stone.

Do you recall what grit/# of sandpaper you used to tone it down and smooth it up?

Again...nice work. beer


Finished up with 400 grit. I only let the paint cure for 24 hours before I started sanding. Was afraid to get too agressive with it so I started and stuck with 400, took a while but the paint stayed on. Really concentrated on the area of the cheek weld, the rest I just knocked the edge off so to speak.
 
Posts: 2242 | Registered: 09 March 2006Reply With Quote
one of us
Picture of Bobby Tomek
posted Hide Post
Thanks! That is definitely a project I'd like to try some day.


Bobby
Μολὼν λαβέ
The most important thing in life is not what we do but how and why we do it. - Nana Mouskouri

 
Posts: 9454 | Location: Shiner TX USA | Registered: 19 March 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Hot Core:
quote:
Originally posted by taylorce1:
I'd be pretty interested in some Blue Dot loads if you ever do!
Excellent way to do some Major Metal Reshaping on the old ones. rotflmo


here's your 2 cents of recognition for your uninvited 2 cents worth of opinion....

how many deer you killed this week? 20, 30, 40?? BOOM...... horse

so what do you do when some of those deer look exactly like the neighbor's Mule?

must have been a mule deer right?
 
Posts: 16144 | Location: Southern Oregon USA | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Painted a couple of Stevens 200

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia