The Accurate Reloading Forums
BRNO Fox Model 2 Hornet

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6711043/m/5811007371

02 April 2012, 20:38
Stonecreek
BRNO Fox Model 2 Hornet
I recently came by a BRNO Fox Model 2 Hornet -- double set triggers, detachable magazine, etc. It looks like it's going to be a great little shooter. However, the magazine (which is long enough for .222's) is blocked at the rear to shorten it and while its abbreviated length is fine for Hornet factory loads with round nose bullets, it is too short for the newer plastic tipped spitzers -- and those shoot MUCH better in this gun than the old RNs.

I don't want to go attempting to modify (translation: potentially ruining) this magazine by removing the block unless I can find another magazine to replace it. It looks identical to the magazine for the current CZ 527, which is readily available, however, does anyone know for sure if a CZ 527 magazine will fit the BRNO Fox Model 2?
07 April 2012, 05:23
Fal Grunt
I will not say I am 100% certian, but the BRNO rifle I looked at was the exact same action as the CZ 527.

For the $35 a magazine costs, I would just order one... you should be able to return it if not?


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
07 April 2012, 05:51
tin can
See if Calhoon can set you straight, he's all over the CZ's etc.
08 April 2012, 20:13
butchloc
take the mag to you gun shop and compare it to a cz. i believe they are the same
11 April 2012, 21:16
Stonecreek
I was able to find a CZ 527 magazine for a .221 Fireball -- it fits my BRNO Fox like a glove. It has a shorter block in it which would be perfect for longer Hornet loads, so I'm going to see if I can bend the magazine lips close enough that they will retain the smaller diameter Hornet cases.