I was wondering if anybody had glass bedded a CZ527? I have the American model and believe it would benefit from this.
If anybody has done this could I please see some photos and basic steps on how it is done.
Cheers guys
Tom

It has to be real close to a large ring Mauser bedding job, and there should not be a problem finding info on that.

I glass bedded a CZ 22 hornet.I think it was a 527 about 8 or 9 years ago.It was my first attempt at glass bedding.
Although not a particularly aesthetic job it certainly improved accuracy. RWS ammo cloverleafed at 100 yds and it went on to sicken a good few foxs.
I bought a Brownells accraglass kit and basically followed the instructions.Using a drill to rout a few holes off at angles around the recoil lug and rear tang may have added a bit more strength.
I have since done it with my Mauser[marked improvement]and a Sako[some improvement].
Sorry never took any photos.

I"m on my 2nd CZ rifle(550), and I do like them apart from the bad bedding. Buy an acraglass gel kit and do the recoil lug at least. My 308 was hitting the stock in places it should"nt so I relieved it(around the bolt handle and one side of the barrel chanel) and glassed it. It did shoot noticeably better, but in 308 bedding may make more difference than in a .22 centrefire.
good luck and good shooting

Hey tommo

Here is a post on bedding and one of the posters bedded a CZ.