Go | New | Find | Notify | Tools | Reply |
one of us |
New in the Box: Bushmaster's 16" Modular Carbine combines many of the most requested Bushmaster Modular Accessories for the AR Type Rifle. It is built around an A3 type Flattop Upper and has a 16" Chrome Lined Chrome Moly Steel fluted barrel with a milled gas block. This special carbine includes a Skeleton Stock - a new approach to AR15 type stock design which features a comfortable rubber buttplate and a quick detach sling swivel mount that can be positioned to either the left or right side of the carbine. A neoprene foam sleeve covers the buffer tube to provide a comfortable cheek weld - it also deadens the operational sounds of the buffer/action spring. A B.M.A.S. Four Rail Free-Floater Tubular For end combined with the A3 type Flattop Upper Receiver provide all the Picatinny rails necessary for mounting a wide variety of sight, scopes or accessories. Free-floating means that nothing touches the barrel from the barrel nut forward - avoiding any possibility of barrel deflection or accuracy degradation. Molded Rubber Rail Sure Grips snap over the rail sections on the hand guard to add comfort and protection. The rear flip-up sight is a dual aperture B.M.A.S. detachable unit with a wind age knob calibrated to 1/2 Minute of Adjustment. The B.M.A.S. front flip-up sight clamps around the milled front gas block. It folds down to allow scope use with the touch of a button and incorporates an elevation adjustable M16A2 front sight post. The Pistol Grip is an ambidextrous design molded of hard urethane with a stipple finish to provide a solid non-slip grip. It is ergonomically contoured to comfortably position the hand and finger for proper trigger pull. The forged, lightweight, 7075T6 aircraft quality aluminum receivers include cartridge case deflector, last round bolt hold open and raised ribs for magazine release button protection. Bushmaster's Modular Carbine is shipped with 10 Round Magazine, Operating and Safety Instruction Manual, and a Black Web Sling in Bushmaster lockable, foam lined Addition: Bushmaster A3 Type Removable Carry Handle A great addition for your V Match… or any flat-top upper receiver, the Bushmaster A3 Type Removable Carry Handle clamps solidly onto the flat-top rail with two thumbscrews, and once you set your zero, it'll repeat every time. The handle includes an A2 dual aperture rear sight with 1/2 minute adjustment for both windage and elevation. It's forged from aircraft aluminum just like our receivers, and hard anodized to the same mil. Spec. finish. All steel parts are Manganese Phosphated for corrosion resistance. New in the box Scope: Trijicon TA01 ACOG 4x32 Details: ACOG 4x32 Scope with Full Line Red Illumination Features black Crosshairs during daytime and tritium illuminates reticle at night. The reticle ranges out to 800 Meters for 5.56(.223 cal). Magnification: 4X Eye Relief: 1.5 in Exit Pupil: 8 mm Field of View: 7.0 degrees Length: 5.8 in Weight: 9.9 oz Field of View: 36.8 ft at 100 yds Adjustment: 3 clicks per inch at 100 yds. Tritium Activity: 100 mill Curies in one source New in the Box - Streamlight M6 Tactical Gun Mount Laser Illuminator with Laser The Streamlight M6 Tactical Laser Illuminator is designed for any police officer involved in tactical situations. The single module, multifunctional device is equipped with a visible aiming laser and visible white focusable illuminator. Rugged polymer finish. Included with the M6 are two 3 volt lithium batteries. The M6 features chemical-resistant polymer and tempered glass lens for easy cleaning, 80-90 lumen halogen lamp and 4 position master switch. The Whole Package is new and everything comes with the Box Price: 2,550.00 shipping included. Cashier check and I ship immediately, regular check when the check clears. Thank you, Roland | ||
|
one of us |
Roland, Did you mean this one for the Classifieds thread? | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia