THE ACCURATERELOADING.COM SMALL CALIBER FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    .243 Data. Accurate or Misprint???

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
.243 Data. Accurate or Misprint???
 Login/Join
 
One of Us
posted
Thumbing thru my Nosler Reloading Manuals the other evening I noticed a load that piqued my curiosity. I've killed a few things with a .243 Win. over the years all with the Remington and Winchester 100gr. factory loads. Deer hit ran up to 50yds and fell over. But, we are always looking for better and more (velocity). In the Nosler No. 3 Manual there is a 100 grain load using 47.5 grains of IMR-7828 powder. The load produces 3250fps. In the No. 4 Manual a load of 45.5 grains produced 3123fps. Both were in a Lilja 24in. test barrel with the same primers. Do you reckon the No.3 Manual load was a misprint or too hot? I like the thoughts of a 243 at 3250fps with a 100 grain bullet.
 
Posts: 1332 | Location: Western NC | Registered: 08 January 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Magnum Hunter1:
Thumbing thru my Nosler Reloading Manuals the other evening I noticed a load that piqued my curiosity. I've killed a few things with a .243 Win. over the years all with the Remington and Winchester 100gr. factory loads. Deer hit ran up to 50yds and fell over. But, we are always looking for better and more (velocity). In the Nosler No. 3 Manual there is a 100 grain load using 47.5 grains of IMR-7828 powder. The load produces 3250fps. In the No. 4 Manual a load of 45.5 grains produced 3123fps. Both were in a Lilja 24in. test barrel with the same primers. Do you reckon the No.3 Manual load was a misprint or too hot? I like the thoughts of a 243 at 3250fps with a 100 grain bullet.
Well, you could always try to work up to it, maybe at 2/10 grain steps. Even if you achieve a couple of hundred fps, I can't imagine you'd gain more than 20 - 25 yards of point blank range, and dead is dead.

Me? I'd stick with what I know to be safe and what works.
 
Posts: 939 | Location: Grants Pass, OR | Registered: 24 September 2012Reply With Quote
One of Us
posted Hide Post
Magnum Hunter--I use 100 grain cup and core-usually Winchester or Remington bulk packed. I don't load them hot-probably 2900-3000 range. Last deer I shot was most unusual. At the shot it didn't flinch,
jump nor fall down, but slowly walked with a stagger. Walked maybe 10 yards and stopped and was standing still but swaying. I walked right up to it while it was still on its feet and I was completely unnoticed. After a short time it fell dead. I had taken out heart and lungs and how it took one step is beyond me.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by carpetman1:
Magnum Hunter--I use 100 grain cup and core-usually Winchester or Remington bulk packed. I don't load them hot-probably 2900-3000 range. Last deer I shot was most unusual. At the shot it didn't flinch,
jump nor fall down, but slowly walked with a stagger. Walked maybe 10 yards and stopped and was standing still but swaying. I walked right up to it while it was still on its feet and I was completely unnoticed. After a short time it fell dead. I had taken out heart and lungs and how it took one step is beyond me.
Not to go too far off topic, but I had a near identical experience.

20 years ago, I shot a 4X4 about 80 yards away with my .35 Rem. Thompson Contender. He was standing broadside, facing right, but looking at me in my tree stand. He gave no sign of being hit. None at all. He just kept looking at me.

I couldn't believe I missed him! So I looked through the little 2.5 scope and found a little mark on his lower chest that I hadn't seen before, right at my aiming point.

I figured I'd hit him where I'd aimed, and that it was a kill shot. But I didn't want to spook him by reloading. After a wait of 15 - 30 seconds(?) he turned 180 degrees, walked very, very slowly for a few yards, turned 90 degrees to his right and walked up hill, stumbling as he walked, turned right took two steps and dropped.

The 180 grain bullet had passed between a couple of ribs, gone through the right lung and taken the top off the deer's heart.

Don't mean to hijack the thread, but I sure get it.
 
Posts: 939 | Location: Grants Pass, OR | Registered: 24 September 2012Reply With Quote
One of Us
posted Hide Post
BL O'Connor--I too could see the spot where I hit it and knew it was a good shot by that.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
Picture of miles58
posted Hide Post
Iam doubtfuk you'll get 3250 FPS out of anything. More like 3050 at the top. If you need 3250 out of a 243 for killing deer try Barnes 85 grain TSXs or 80 grain TTSXs and 37.6-38.5 grains of Varget. That'll give you good accuracy once you find COAL and will penetrate better than any 100 grain cup and core and you get the 3250 with room for more up to 3400.
 
Posts: 965 | Location: Minnesota | Registered: 25 January 2008Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Misprints have been known to happen. Most 308 class cartidges have a 4 grain charge weight in their spread. A different max of 2 grains from 1 manual to the next is pretty significant on a base ~45 grns

Also, Hodgdon while for a diferent bullet but still a 100 grains shows 46 grains as a compressed load.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10181 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
If you don't get 3250 the deer will just laugh at you.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
posted Hide Post
Do the two loads have the same bullet and length? 7828 is a pretty slow powder so the case is probably full or even compressed. Maybe the lighter load is all they could fit in there?
 
Posts: 871 | Registered: 13 November 2008Reply With Quote
one of us
posted Hide Post
quote:
After a short time it fell dead. I had taken out heart and lungs and how it took one step is beyond me.


Easy they do it all the time.

I seen deer with the heart and lungs turned to mush. Run close to a hundred yards.

Nothing unusual about a deer moving after a chest hit.

Enough oxygen in their system to keep moving that's all.
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
Administrator
posted Hide Post
I think both were accurate.

Different barrels.

Different velocities.

By the way, you are not going to kill anything better with higher velocity.

What counts is where you hit them.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 69639 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
posted Hide Post
quote:
(Saeed) By the way, you are not going to kill anything better with higher velocity.

What counts is where you hit them.




Are you telling me if I hit them in the leg for example they are going to live but I'm not going to kill them even if I had 200 fps more velocity? What if I hit them in the leg with a bigger bullet, wouldn't that kill them for sure? If not, that is contrary to what I read here all the time.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
posted Hide Post
Hitting a deer in the leg is a kill shot! Happened to me several times - even with one moose. Bullets hit the front leg and broke it. Then they continued on through the lungs and out the other side. Animals were dead in seconds….

But to your point, maybe a bigger faster bullet would have killed them deader. Seems that many here think so.


.
 
Posts: 677 | Location: Arizona USA | Registered: 22 January 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by carpetman1:
quote:
(Saeed) By the way, you are not going to kill anything better with higher velocity.

What counts is where you hit them.




Are you telling me if I hit them in the leg for example they are going to live but I'm not going to kill them even if I had 200 fps more velocity? What if I hit them in the leg with a bigger bullet, wouldn't that kill them for sure? If not, that is contrary to what I read here all the time.


Try one of the .22 centerfire's---they will knock the shit outa anything!!!

HIp
 
Posts: 1903 | Location: Long Island, New York | Registered: 04 January 2008Reply With Quote
One of Us
posted Hide Post
quote:
Try one of the .22 centerfire's---they will knock the shit outa anything!!!

HIp


Been saying and doing that for years.
 
Posts: 3811 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
posted Hide Post
34.5 grains of IMR 4320 and a 100 grain Nosler flat base has been making meat for me for 52 years as of this year. Not a fast load and does not need to be .
If I hunted where I made a lot of shots of 300 yds or more a faster load might be an advantage to me but I can't imagine the deer would ever know the difference.


Grumpy old man with a gun,,,,Do not touch.
 
Posts: 53 | Registered: 14 August 2022Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    .243 Data. Accurate or Misprint???

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia