This is my 1,000yard Benchrest rig.

*Stolle Polar Dual-Port action, slimmed down .200" to fit in McMillan Tooley MBR stock

*30" Krieger 1in9 Barrel chambered in 6.5 Gibbs

*Jewell 1.5 ounce trigger

*Swarovski 6-24x50 "Habicht" scope in tapered rings by Jerry Stiller of Viper Action fame.

*Front rest is from Accuracy One, run By John Hoover. John has these made locally and sells them as you see it for about half what a "big name" rest with base would cost.

If you're having trouble posting a pic, e-mail it to me. I'll put it in the same Photopoint album as this one and post it for you.

Have you had a look at our gallery?
http://www.accuratereloading.com/gallery.html

------------------
saeed@ emirates.net.ae

www.accuratereloading.com

Here's mine, Rem 700 LH trued and nickle plated, Shilen #7 select in 22-250, stock is Remington 40x, Leupold QRW rings and bases, Leupold 6.5-20 target dot reticule.

I'll let Pete describe it:
"Here's my .22/250 Tikka M55 heavy barrel, bedded into Tikka biathlon
stock. Optimate 8-32 x 44 scope, Lightforce 1 million cp lamp, Harris 23" bipod."

[/URL]

------------------
http://www.angelfire.com/ab/fergus

[This message has been edited by Fergus Bailey (edited 07-25-2001).]

[This message has been edited by Fergus Bailey (edited 07-25-2001).]

------------------
http://www.angelfire.com/ab/fergus

McD-
I took the liberty of cropping and resizing your pic.

That's a beatiful stock. I'm considering a maple stock for a hunting rifle I have.

Well, I have a pic in my inbox so it's off to process that one.

[This message has been edited by LongDistanceOperator (edited 08-20-2001).]

[This message has been edited by LongDistanceOperator (edited 08-20-2001).]

*Remington 700 action, trued.

*Shilen Match barrel chambered in 22PPC, 7HV contour, 23 3/4" long, 8 flutes.

*Richards Microfit stock.

Nice rig Stan!

I'd like to thank everyone who has participated. Tell your friends and let's get their rifles on here too.

------------------
A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms shall not be infringed !!

Go ahead and post the picture...I wouldn�t mind seeing your dad�s rifle.

Forgot to add, this is an xp-100 pistol, but i figured you guys wouldn't mind much. picture doesn't do it much justice.

- xp-100 blued reciever
- polished stainless shilen barrel in .308 Winchester
- Lapped, Polished, and Jeweled Bolt
- Installed custom bolt release (not seen in pic)
- Customized and repainted factory stock
- Harris Bipod
- Burris 3-9x32 PA Posi-lock
- Trigger pull little over 1 pound

None of this was done by a gunsmith, only my dad with minimal help from me and one of his friends he works with.

------------------
A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms shall not be infringed !!

Tell your dad that it looks great!

This began as a badly butchered M96 Swede. I ordered a military barrel from SAMCO, purchased the Weaver Grand Slam 3-10X and sent them to my gunsmith. He shortened the barrel to 24", changed the trigger and striker, changed the bolt handle, tightened the head space, squared the bolt face, acquired and bedded the stock, and mounted the scope. On the test firing this rifle put three rounds in a group under one inch at 100 yards.

I love these old Swedish Mausers. This rifle really was in a sorry state and now after a rebuild it is sub MOA. Now I get to work up some new loads.

------------------
Andr�

This rifle will get a new scope this year. Hopefully, an 8x-40x 40mm tube with 88mm objective for really long range varmint shooting. Rifle currently projects 139gr Lapua Scenar at a little over 3000fps using excellent VV N165 loads from RELOADING PAGES.

And here is my "light Varmint Rifle", it is a 6.5-308 on an old M70 action and with a USO 6x-30x Sn-3.

[This message has been edited by DMCI* (edited 09-27-2001).]