THE ACCURATERELOADING.COM SMALL CALIBER FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Don't Tread On Me engraved AR15 lower receivers

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Don't Tread On Me engraved AR15 lower receivers
 Login/Join
 
one of us
posted
 -

I'm planning on doing a batch of AR15 lower recivers with this artwork laser engraved on the right side of the mag well. Cost will be around 150 dollars, and probably a bit less. I have 3 firm orders, and need a minimum of 15 to hold that pricing. I want the flagpole to go down the side of the magwell, along the fence around the mag release, and extend all the way down to bottom of the well, to where it flares. The flag itself would form a rectangle, filling in the mag well, and would leave a triangle shaped wedge along the bottom. The border around it would be a bit thick, really defining the flag, and the snake and writing would fill up the rest, being proportional to the artwork on that original of the flag.

Anyone interested?

[ 05-30-2003, 04:11: Message edited by: Urodoji ]
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
posted Hide Post
What brand of lowers are you planning on using? I'm interested, depending on the maker.
 
Posts: 2629 | Registered: 21 May 2002Reply With Quote
one of us
posted Hide Post
You might also want to run this by the guys over on www.ar15.com. Should get you some interest there.
 
Posts: 1361 | Location: congress, az us | Registered: 27 February 2001Reply With Quote
one of us
posted Hide Post
Using a DPMS Forged lower.
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Urodoji:
Using a DPMS Forged lower.

Pending a firm final cost, I'm in.

Send me an email (not PM please) with the details. Thanks!
 
Posts: 2629 | Registered: 21 May 2002Reply With Quote
one of us
posted Hide Post
Sent.
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
new member
posted Hide Post
quote:
Originally posted by muzzle:
You might also want to run this by the guys over on www.ar15.com. Should get you some interest there.

Don't know that he would be welcome over there.
 
Posts: 49 | Location: WI | Registered: 14 May 2003Reply With Quote
one of us
posted Hide Post
Long story. You can IM me if you really wanna know.
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
Picture of Duckear
posted Hide Post
A bit of history on this flag by Chris Whitten
from http://Gadsden.info/history.html

Gadsden Flag History

By 1775, the snake symbol wasn't just being printed in newspapers. It was appearing all over the colonies: on uniform buttons, on paper money, and of course, on banners and flags.

The snake symbol morphed quite a bit during its rapid, widespread adoption. It wasn't cut up into pieces anymore. And it was usually shown as an American timber rattlesnake, not a generic serpent.

We don't know for certain where, when, or by whom the familiar coiled rattlesnake was first used with the warning "Don't Tread on Me."

We do know when it first entered the history books.

In the fall of 1775, the British were occupying Boston and the young Continental Army was holed up in Cambridge, woefully short on arms and ammunition. At the Battle of Bunker Hill, Washington's troops had been so low on gunpowder that they were ordered "not to fire until you see the whites of their eyes."

In October, a merchant ship called The Black Prince returned to Philadelphia from a voyage to England. On board were private letters to the Second Continental Congress that informed them that the British government was sending two ships to America loaded with arms and gunpowder for the British troops.

Congress decided that General Washington needed those arms more than the British. A plan was hatched to capture the cargo ships. They authorized the creation of a Continental Navy, starting with four ships. The frigate that carried the information from England, the Black Prince, was one of the four. It was purchased, converted to a man-of-war, and renamed the Alfred.

To accompany the Navy on their first mission, Congress also authorized the mustering of five companies of Marines. The Alfred and its sailors and marines went on to achieve some of the most notable victories of the American Revolution. But that's not the story we're interested in here.

What's particularly interesting for us is that some of the Marines that enlisted that month in Philadelphia were carrying drums painted yellow, emblazoned with a fierce rattlesnake, coiled and ready to strike, with thirteen rattles, and sporting the motto "Don't Tread on Me."

An American Guesser

In December 1775, "An American Guesser" anonymously wrote to the Pennsylvania Journal:

"I observed on one of the drums belonging to the marines now raising, there was painted a Rattle-Snake, with this modest motto under it, 'Don't tread on me.' As I know it is the custom to have some device on the arms of every country, I supposed this may have been intended for the arms of America."

This anonymous writer, having "nothing to do with public affairs" and "in order to divert an idle hour," speculated on why a snake might be chosen as a symbol for America.

First, it occurred to him that "the Rattle-Snake is found in no other quarter of the world besides America."

The rattlesnake also has sharp eyes, and "may therefore be esteemed an emblem of vigilance." Furthermore,

"She never begins an attack, nor, when once engaged, ever surrenders: She is therefore an emblem of magnanimity and true courage. ... she never wounds 'till she has generously given notice, even to her enemy, and cautioned him against the danger of treading on her."

Finally,

"I confess I was wholly at a loss what to make of the rattles, 'till I went back and counted them and found them just thirteen, exactly the number of the Colonies united in America; and I recollected too that this was the only part of the Snake which increased in numbers. ...

"'Tis curious and amazing to observe how distinct and independent of each other the rattles of this animal are, and yet how firmly they are united together, so as never to be separated but by breaking them to pieces. One of those rattles singly, is incapable of producing sound, but the ringing of thirteen together, is sufficient to alarm the boldest man living."
 
Posts: 3113 | Location: Southern US | Registered: 21 July 2002Reply With Quote
one of us
posted Hide Post
Got them engraved yesterday, a total of 40. Will post a pic tomorrow.
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Urodoji:
Got them engraved yesterday, a total of 40. Will post a pic tomorrow.

Looking forward to it. I'm ready to send the check...
 
Posts: 2629 | Registered: 21 May 2002Reply With Quote
one of us
posted Hide Post
 -

[ 06-24-2003, 21:18: Message edited by: Urodoji ]
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
posted Hide Post
Looks NICE!

Hold mine, I'll be getting a check off to you soon.
 
Posts: 2629 | Registered: 21 May 2002Reply With Quote
one of us
posted Hide Post
Price is $135 + $10 S&H.
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
Picture of TXPO
posted Hide Post
Boy!....that makes me wanna put another AR together!
 
Posts: 700 | Location: Wallis, Texas | Registered: 14 October 2002Reply With Quote
one of us
posted Hide Post
Man I really like that. Wish I had seen this earlier. i just bought two Mega lowers last week.
 
Posts: 622 | Location: PA. U.S.A. | Registered: 12 May 2002Reply With Quote
one of us
posted Hide Post
If you'd like, you could send them to us and have them engraved next time we do a run of the Gadsden lowers. Or, if you'd like, we're doing these next week:

 -

That's a quick photoshop job, the actual image will be sized as large as possible. I'll post a pic when we get them done.

[ 07-04-2003, 08:39: Message edited by: Urodoji ]
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
one of us
posted Hide Post
 -

I'm pretty pleased with the way the Molon Labe's came out...
 
Posts: 546 | Location: Oklahoma City, OK | Registered: 29 November 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Don't Tread On Me engraved AR15 lower receivers

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia