THE ACCURATERELOADING.COM SMALL CALIBER FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Is it true about the8x57 mauser?

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Is it true about the8x57 mauser?
 Login/Join
 
One of Us
posted
Are the throats on a military surplus Mauser barrel long?

Is it true the best accuracy you could see is 1.50 of an inch?

Could these barrels benefit from shortening the distance to the lands of the rifling?

What is the best you have gotten from hand loads best group, and best FPS?
Please specify barrel length.

I will post same questions on gunsmithing forum as well.

 
Posts: 2 | Location: Florida | Registered: 08 March 2003Reply With Quote
<Don Martin29>
posted
The military 98 in 8X57 that I owned had a tapered throat. I compared it to a 03A3 and fired each with WW11 ammo. The Mauser was about a 3 MOA rifle and the Springfield was good for about 1 MOA. But the Springfield had a peep sight. The bolt on the Springfield was much easier to work also.

Leave the Mauser as is.

 
Reply With Quote
<8mman>
posted
it is true that military barrels are long throated but I have never heard of the 1.5 inch limit.I have had many that would print less than half that. My best group was out of a M48 yugo that I got for 120$ put a scope on and loaded 200gr speers to 2500fps. 0.534 3-shot. I have also loaded 200grs to 2650fps but accuracy was not good.

[This message has been edited by 8mman (edited 02-07-2002).]

 
Reply With Quote
<KING>
posted
Strangely enough I lived in Orange vale in a Green house on castle monte circle. I own a K98 and shoot and reload for it. Love it. When I lived there they were building Atlas rocket engines and shook the ground, from Aero Jet. Any memories? Hard to tell from earthquake tremmors? Any Ideas?
 
Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by KING:
Strangely enough I lived in Orange vale in a Green house on castle monte circle. I own a K98 and shoot and reload for it. Love it. When I lived there they were building Atlas rocket engines and shook the ground, from Aero Jet. Any memories? Hard to tell from earthquake tremmors? Any Ideas?


I hope you do not have reoccurring nightmares// how long ago was this?

Scout...

 
Posts: 2 | Location: Florida | Registered: 08 March 2003Reply With Quote
<KING>
posted
To answer your question Scout, Many Moons ago! But seriously, My 98 w/scope shoots less than 1inch groups with reloads. It shoots better than I can, for a 60yr old rifle, be pleased with your's it's made better than many current makes and models of remchester rifles (remchester/NO TYPO) My current load is 51.5N150 w/180 Nosler Ballistic Tip and CCI Mag primer. Very accurate for an old War Horse and safe in my rifle, If you reload work up all loads of course. Good luck and good shooting!
 
Reply With Quote
<Mats>
posted
quote:
Originally posted by scout:
Is it true the best accuracy you could see is 1.50 of an inch?

Hell no.

-- Mats

 
Reply With Quote
One of Us
posted Hide Post
Mat, could you elaborate on this issue please...? Group sizes, loads, bullet etc.
 
Posts: 2 | Location: Florida | Registered: 08 March 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Small Calibers    Is it true about the8x57 mauser?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia