The Accurate Reloading Forums
260 Rem Conversion

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6711043/m/16310928

06 March 2003, 04:03
Dr. Duc
260 Rem Conversion
I need some opinion here. I have a long action FN that was originally a 25-06AI- aperverse cartridge if there ever was one. A gunsmith friend wanted to play with the 260 Rem when it first came out and prevailed on me to rebarrel this rifle to 260. He then died amd the plans changed.
It seems a waste of a long action FN to me. It is a heavy barrel gun. What can I convert it to and utilize the action length without having to rebarrel again?
It's a great barrel on a great action but underutilized. What about a "260 Weatherby Mag"?
06 March 2003, 04:47
muzzle
6.5-06?
06 March 2003, 05:31
<razorback>
i agree with the 6.5-06, it should have been what winchester brought out in 1925 i think, it is a bad mofo. i am thinking about rebarreling my model 700 titanium 30-06 to a 6.5-06. i already have a 260 though so i doubt that will happen.
06 March 2003, 09:02
dantec
6.5/06 is a good hoice you have a long action and 6.5/06 is a 06 family cartridge , performance is very good ( accuracy/velocity ) and that not costly caliber and you doesnt need fireforming

I use 6.5/06 for long range shooting and hunting

good shooting

DAN TEC
07 March 2003, 02:08
Dr. Duc
Thanks! I didn't know to go with the 6.5-06 or the 6.5x57. You solved my problem.
07 March 2003, 07:25
<Bruce Gordon>
If you want to stay away from a wildcat you could go with the 6.5mm Swedish Mauser. It is just a bit too long for the short actions but work just fine in long actions.
They give more velocity than the 260, and are much easier on barrels than the 6.5-06.
Excellent quality brass is available.
You can buy ammo right off the shelf.
07 March 2003, 08:17
dantec
if yu plan to go in 6.5x57 request a short throat chamber original throat is very deeeeeeeeep ( far deeper as a Weatherby ) nd accuracy not really amazing if you compare to the accuracy potential of your barrel there is chamber (PPG drawing ) name 6.5x57 match , I have one made one JGS CIP rework with std lead and throat and accuracy is very good but case ( RWS ) are far costly than 06 and 06 from Lapua are the very best ( with sako )

good shooting

DAN TEC
07 March 2003, 08:19
dantec
same in 6.5x55 original chamberis broad ( broad base , a deeeep throat ) long range shooter u e match chamber to allow factory chambering cartridge but short throat increase accuracy to the top level

good shooting

DAN TEC