Please share some loads for the 260 and 120 g TTSX.
I presume this bullet would, like many other would work well on deer. But in addition to that should preform adequate if used in a pinch on bigger game.

Also I have a 20 1/4" barrel on my sako 75.
So should I expect about 150 fps less than a guy would get with a 24" barrel.

Was out at the range yesterday zeroing a scope on a new barrel in 260 I just put on a Model 70...

got it zeroed at 100 yds...then put the lower reference point on the scope on a metal ram at 500 meters on our range..4 shots, and 4 "Clang!!!"

the load I was using was 40 grains of IMR 4895 and a Federal LR primer, in Win 308 Brass necked down to 260...120 grain bullet..

When working up different loads, I tried 43 gr of H4350, F210M primers, Nosler brass and was getting .25" groups. Vel around 2849 fps from a 24" Rem 700 CDL SD Limited. Shot a 1.1" 200 yd group. 2-7x VXII scope.

Alan