I am closing out my case forming dies in the classifieds. http://forums.accuratereloadin...2711043/m/3381096411
I have no intention of going back into production.
You can cut .350 off the bottom of our die holder and could form cases as short as .750 or follow Bartche's suggestion to me and buy a 7/16"[.4375] and a 1/2"[.500] drill bushing that has the same outside dimension as our die inserts. You can put them in the lathe and cut with carbide or grind a 45deg. included angle and be able to handle cases as large as .532 or so.
Butch