I have just finished building my 250 Ackley.
I have fired only about 16 rounds through it, fire forming factory rem. loads. Every thing seems to be working fine and my last three shots went into about an inch.
Anyway I would like some load data for:

Barnes 100grn XLCs
Speer 100grn hot-cor
Nosler 100grn BTs

using

H414
RL19
W760

These are the powders and bullets that I have right now. But I'm also very interested in any of ya'lls favorites.
By the way the rifle is a M700 in a HI-Tec stock (the 17oz one) and has a Pac-Nor "light weight" contour barrel. It weighs 7lbs even. Now I know that doesn't set any records but that is also with a sling, 3x9x40 vxII, a stock full of Accra- glass and a 1" decelerator pad. Don't ask about the recoil pad it was a brain fart kind of thing. I will try to post some pictures, if ya'll want to see another black rifle, as soon as I spray the stock with some paint or bed liner. O no more weight.
Thanks for any help.
Shawn Allen

Shawn,
I've had one. It was a Remington Model 7 which I had rebarreled...used to be a .308. One of my best loads was a 100 gr Speer SP over 42 grs of H414 and a WLRM primer. From a 21" barrel, velocity averaged 2,922 fp, ES was 36 and it clustered three shot groups an average of 0.788". I have lots of other loads, but nothing with W760 or Rel 19.
Joe

Shawn, email coming your way. I am really excited to get my .250 AI, and start shooting it,

John

Hondo64d
Many thanks for the e-mail. I will try some of these loads tomorrow. If I come across any thing worth while I'll be sure and pass it along.
Thanks again
Shawn
P.S. ya'll keep 'em come'n.