The Accurate Reloading Forums
9,3 RUM?
22 June 2006, 01:43
Loonie9,3 RUM?
My search skills suck - I just don't speak puter so I thought I would just come out and ask - was BS-in at work today and thought of this combo - 300 RUM to 9,3 RUM. I am sure it has been done - just what were the results?
Not really interested in owning one - I hunt nothing that can't be killed with a 30-06 but was curious.
22 June 2006, 02:52
Dr. LouThere's a factory 375 RUM and I have heard of the 35 RUM wildcat, but can't say that I know of anyone doing the 9.3.
****************
NRA Life Benefactor Member
22 June 2006, 03:04
I Bin TherbeforCheck Charlie Sisk. I believe he has done one. Also, look at the home paages of those who provide reamers. They list a lot of wild c ats. Again, I believe I've seen on listed. Also do a search on this site.
By the By the 366 DGW is done on a 416 Rigby. Pretty close to what you're looking at.
John
22 June 2006, 05:57
Bwana-beThere won't be any surprises. Check out the 338 RUM and the 375 RUM. No reason it would perform less or more than could be expected.
Figure a little slower than same-weight 375 loads.
Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
22 June 2006, 09:42
Woodjack
I dont see the need for more capcity in .366"bore,than the 9.3x70.
24 June 2006, 03:21
Bwana-beWell, you're just not looking in the right places!
Second from right, 9.3x64? Sweet round. What's that first one, 9.3x57?
Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
24 June 2006, 04:19
mr rigbya 9,3 RUM ,thats nothing more than an americanized 9,3x70.
24 June 2006, 04:20
mr rigbyits the 9,3x70 thats nr two from the right
30 June 2006, 15:56
Sisk RiflesLoonie
I've built a few in 9.3 Ultra. 286 grainers will pass 2900 fps with pressures in the low 60's. If I were to ever build one for myself, it would weigh at least 9 pounds without scope.
Charlie
01 July 2006, 08:14
.366torquequote:
Originally posted by Sisk Rifles:
Loonie
I've built a few in 9.3 Ultra. 286 grainers will pass 2900 fps with pressures in the low 60's.
Daggone! I read that you lean towards a shorter barrel, sssooooo what length?
05 July 2006, 03:59
Sisk Rifles366Torque
I'm not a fan of long barrels on hunting rifles, unless its a varmint rig.20 to 23 inches does the job for me.
Charlie
05 July 2006, 07:38
.366torqueWow!!!! So a 26 inch tube should a true 3000 fps rifle!
05 July 2006, 08:06
Sisk Rifles366T
The test I've done show about 20 fps per inch, from 257 Roberts to 300 Ultra.
Charlie
05 July 2006, 11:22
.366torqueWell shoot! Only 60-80 fps faster.
Thanks Charlie
23 July 2006, 03:38
Fat_AlbertA 366 DGW holds 127 gr. of water. Its a 416 Rigby necked to 9.3. Quality Cartridge make the cases.