THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
6mm AI?
 Login/Join
 
one of us
posted
I have a new rifle on the way and I am looking for loads specifically in the 85-90gr range. And before everyone tells me to go look at Mike J's angelfire page, I know where it is and have looked already. I'm looking for some NEW information. So what loads has everyone tried? Thanks.
 
Posts: 356 | Location: Lansing, MI | Registered: 11 July 2000Reply With Quote
one of us
posted Hide Post
You can use any data from the 6mm rem, use what is the maximum load as the starting load for your AI. Maximum load will be reached somewhere in the 2.5-5% over standard data depending on what standard the loading manual was loaded, many hold the pressures down do the 742 rem autoloaders that were chambered in 6mm. Be carefull as you work up, AI cases are famous for masking "normal" pressure signs until they are way beyond realistic maximum pressures. You must have a chronograph to safely work up your loads.
 
Posts: 869 | Location: N Dakota | Registered: 29 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia