THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
source for dies?
 Login/Join
 
one of us
posted
I have a set of Lee dies in 6.5-300WSM that I feel are a bit too tight, specially in the neck area.

I would like to buy a set from another brand and would like to know which one would you recommend.

Is there any die maker tht has them more ore less over-the-counter?

Montero
 
Posts: 874 | Location: Madrid-Spain | Registered: 03 July 2000Reply With Quote
One of Us
posted Hide Post
From what I've found,it seems RCBS is the only other across the counter die in 6.5x300WSM. Of course that's NOT a bad thing as they are good dies.

til later
 
Posts: 178 | Registered: 24 February 2008Reply With Quote
one of us
posted Hide Post
Cann't you use a Redding Type S bushing die for the 300wsm and just change bushing to fit the 6.5 and use the small expander that comes with the die. Then use the Lee for bullet seating you can get the Redding in neck or FL.


VFW
 
Posts: 1098 | Location: usa | Registered: 16 March 2001Reply With Quote
one of us
Picture of HankinColorado
posted Hide Post
quote:
Originally posted by tom holland:
Cann't you use a Redding Type S bushing die for the 300wsm and just change bushing to fit the 6.5 and use the small expander that comes with the die. Then use the Lee for bullet seating you can get the Redding in neck or FL.


+1 thumb

Hank


Life, it's good...
 
Posts: 225 | Location: Colorado Springs USA | Registered: 23 July 2004Reply With Quote
one of us
posted Hide Post
I called RCBS and I was very lucky because they had one in stock!

I bough it and will be with me in just a few days.

Thank you for your advise.

Montero
 
Posts: 874 | Location: Madrid-Spain | Registered: 03 July 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia