Left to Right

308Win for scale, 264, 308 and 338 cals case capacities run in the mid 70s of grains of H2O. Will start with the 338 tomorrow. Big Thanks to Mike S. @ OTT

for the barrel and chamber work....also putting up with me and my bugging him about cranking these and the custom dies out.

[image]http://images.snapfish.com/34269%3A2%3B23232%7Ffp58%3Dot>233%3B%3D64%3B%3D76<%3DXROQDF>23236%3B%3B<7%3B%3B49ot1lsi[/image]

Well, that's weird... The code doesn't seem to be working...



[image]http://images.snapfish.com/34269%3A2%3B23232%7Ffp58%3Dot>233%3B%3D64%3B%3D76<%3DXROQDF>23236%3B%3B<7%3B%3B49ot1lsi[/image]



But clicking on the link does...



http://images.snapfish.com/34269%3A2%3B23232%7Ffp58%3Dot>233%3B%3D64%3B%3D76<%3DXROQDF>23236%3B%3B<7%3B%3B49ot1lsi

Not sure what the parent case is... .376 Steyr?

.376 Steyr

WC

Yup. Definitely 376. Looks like you're chambering it in a 3.34" action as well. That .264" will be a screamer, for sure. Very close to Win Mag performance. It would also do well in a 3.1" action, I'm sure, though for the smaller bores it may be worthwhile to bump the neck forward.
You know, if you can ever get a hold of 9.3x64mm cases, they don't have the rebated rim. Might feed better if that ever becomes an issue.
Good luck with your project!

You guys are good!! 376Steyr it is. rim and feeding is no concern as I am working with these cases on the TC Encore platform. Thanks and I'll be sure to post the results.

Mikey thanks for posting the link...not sure why the code isnt working it was last night. That is a new pic site for me...



Ill try to imagestation;

We aim to please! The .376 case is a good one for wildcats, lots of potential. I'm excited to hear what the .338 can accomplish with it.

Cats? Parents?