THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: 375 WSM vs 375 Taylor , which one?
 Login/Join
 
one of us
posted
I own a .375 Taylor, so here goes.... Dies are available from 4D for $69. With only a 21 inch barrel, you are obviously not looking for max ballistics, so no real advantage to either one there. And, with a 13 inch length of pull, you should not have a problem with eye relief (probably THE reason I like my short action, .300 WSM so much). You are going to get 3 down and one in the pipe with either one, so, again, no advantage. I'm assuming you would have to neck .300 WSM brass up to .375, which is a long way, doable, and will probably lead to thin brass necks. The Taylor MAY be easier to get to feed in a CRF rifle, but my push feed Browning A-Bolt swallows the .300 WSM round like fish down a seal. Soooo, sounds like a toss-up to me. Wanna know why I settled on the Taylor? I had inherited 200 new Remington .338 WM brass and I don't own a .338. I wanted a Thumper, so that's where I went. No regrets.....

MKane160 aka BigDogMK
 
Posts: 488 | Location: TN | Registered: 03 January 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia