One of Us
| Don't know why it would not work unless there would be some chemical element harmful to the metal, but doubt that. Will say a grease several of us have found that works good for a grease on our match rifles to prevent wear is a disc brake grease for autos. It has a very wide temperature range for both cold and heat if you will. Just a suggestion. |
| | | Posts: 1328 | Location: West Virginia | Registered: 19 January 2009 | 
IP
|
|
One of Us
| I use the olive drab grease that comes in a small syringe-- only because it was given to me by my gunsmith. I use the blue EP extreme-pressure grease on the ram of my press. Works great... |
| | | Posts: 16534 | Location: Between my computer and the head... | Registered: 03 March 2008 |
IP
|
|
Moderator
| CV Joint grease wouldn't be bad for a gun necessarily, however the film strength properties that -make- it a CV Joint lubricant won't really have any benefit in a firearm but that doesn't make it a bad choice.
for every hour in front of the computer you should have 3 hours outside
|
| | | Posts: 7786 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000 |
IP
|
|
one of us
| quote: Originally posted by lal:
Spoke to a chap that uses CV joint grease to lube his guns and swears by the stuff. Anybody else using it and are there any negative aspects with long term usage? Thanks
I sold auto parts for quite some time. One thing I remember about CV joint grease is that it would separate within its container and the "oil" would leak out and cause a real mess. I could understand using it on the locking lugs, but I would not want to use it on the outside of a gun because it would tend to creep into the stock.
Jason
"You're not hard-core, unless you live hard-core."
_______________________
Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt.
Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry
Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure.
-Jason Brown
|
| | | Posts: 6842 | Location: Nome, Alaska(formerly SW Wyoming) | Registered: 22 December 2003 |
IP
|
|
One of Us
| Thanks for the replies. Does CV Joint grease contain any chemicals that are harmful to metal? I had a look at a tub of this stuff and all it says is that it contains Lithium and Moly. |
| | | Posts: 885 | Location: Eastern Cape, South Africa | Registered: 08 January 2010 |
IP
|
|
One of Us
| quote: Originally posted by lal:
I had a look at a tub of this stuff and all it says is that it contains Lithium and Moly.
Both are ingredients in high-quality greases. I've seen the oil separate from grease but you have to have a bit of it, like in a jar or a tub, and it has to set for a long, long time before the liquid will leech out... |
| | | Posts: 16534 | Location: Between my computer and the head... | Registered: 03 March 2008 |
IP
|
|
One of Us
| quote: Does CV Joint grease contain any chemicals that are harmful to metal?
Isn't that what it's made for? |
| | | Posts: 1615 | Location: South Western North Carolina | Registered: 16 September 2005 |
IP
|
|
One of Us
| Jim C, I recently read somewhere that a certain major arms manufacturer had problems with the lube they were using on the threads of their barrels, not so sure, and it turns out these barrels were falling off from the Chlorine(?) in the lube they were using. I found that rather disturbing and an eye-opener. |
| | | Posts: 885 | Location: Eastern Cape, South Africa | Registered: 08 January 2010 |
IP
|
|
