13 December 2007, 05:15
TCLouisbarrel G2 to old style frame
Just whack off that stupid extension . . .
Correct ? ? ?
Grind, cut or will it come out some other way?
13 December 2007, 08:02
OLBIKERNot sure what you mean.I put new barrels on my old frame and dont have to whack off(ANYTHING)

13 December 2007, 14:56
TCLouisThis is a 209X45 barrel and has a pin sticking out of the bottom of the barrel lug about about 1/2".
OK, gotta research why TC went out of their way to make muzzle loader barrel incompatible with old frames when they did NOT do it for smokeless barrels!
14 December 2007, 04:43
OLBIKERThats a differnt story.That frame is not meant to shoot the muzzle loader barrel.

17 December 2007, 08:20
TCLouisOk, found (was told) the answer to this.
Pin put there to prevent use on old (non G2) frames to keep blow by from the 209 priming system out of the actions pieces and parts.
Apparently the G2 has many fewer moving parts to rust up.
25 acp priming system will apparently solve most of the blow by issue.
18 December 2007, 04:39
OLBIKERYou really dont need 204 Primers.That is all marketing hype.A no.11 or musket cap would do the same thing!!!(On the appropriate nipple)
