01 November 2003, 08:48
bigchast1need expert (?) load data
I have came in contact with some lead bullets for my 7 TCU. They are 175 grain, with a gas check. Got about 300 of them so i need a good start load. Been told to keep velocity under
1800 fps. I need to shoot these up so any help is appreciated.
03 November 2003, 07:42
Magnum MikeI used 16 grains of H110 in Win cases, WLR primers with a 160 cast bullet. Never chrono'd it was very accurate and not much in the way of leading. I WOULD REDUCE this load by about 1 grain to start with those 180's. If you have a Lyman manual, check it for blue dot loads, if you dont have one, shoot me an email and i will check mine....
HTH,
03 November 2003, 14:38
7-30 WatersTry Accurate Arms XMP 5744
Start at 16 grains - 1400 fps
Max load of 18.0 grains -1600 fps
OAL - 2.495 inches
XMP 5744 is a very bulky cast bullet powder and is position insensitive.
Works well in any gun I own with cast or jacketed bullets.