The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Single Shot Pistols Gonna order a barrelGo | New | Find | Notify | Tools | Reply | |
| Gonna order a barrel | Login/Join |
One of Us |
Ok folks need a little help please!  Getting ready to order up a barrel for my T/C G2 in 222rem. (I like the performance of this round). The barrel will be either 14 or 15" long and I am not sure what would be a better twist rate.  I will be shooting a 40 grn bullet for the most, exclusively. (fits between the 32 in the 22mag and the 52/55 in 22-250) From reading, I have seen that a recommended twist "UP TO" 63grn is 1:12 and "UP TO" 55grn is 1:14. I have also seen a slower twist for 4100fps of 1:15 and over 4300fps of 1:16. I know there is no way I will be even close to the 4100 to 4300fps but will I need a slower twist for the 40grn pill?  Thanks, Smedley ______________________ Smedley  ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | ||
|
| one of us |
standard twists 1:14 will work fine for this bullet. I shoot this is my shilen VVA .223 encore and it is consistently a 3/4 MOA. | |||
|
| one of us |
My .221 has a 1-14 twist ....shoots 40 and 50 gr. bullets excellent. Where are you ordering the barrel from ? | |||
|
| One of Us |
skb2706, I am thinking very strongly about OTT! I am however looking at Match Grade Machine Works also. I have not ruled out Bullberry but, I am leaning towards OTT. Do you have a preference? And if so why? Smedley ______________________ Smedley ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
| new member |
Smedley, I can highly recommend OTT barrels. They are superbly accurate and top quality in workmanship and finish. You send Mike at OTT several dummy rounds produced by your dies and he produces a chamber to fit your ammunition, not the other way around,-tryng to fit your reloads to someone else's chamber. His prices are less than many of the custom barrel makers out there. The drawbacks are: 1) He has many repeat customers and will not rush a job, so count on at least a four month wait 2) At the present time, he only supplies one-inch bull barrels to the length you specify. He has purchased a CNC machine to cut tapers, but it is not up and running yet. He will use a contoured, unchambered blank if you supply one. If you can live with these conditions, you will not find a better barrel. | |||
|
| one of us |
smedley, I have a 16" Contender barrel and it has a 1:14 twist. I am shooting the Hornady 40 V-Max at a muzzle velocity of 3299 (chronographed). This critter is amazingly accurate. At the end of the past summer 2005, I shot 6 groundhogs one evening. The closest one was 194 yards(range finder not estimated) and the longest was 227 yards. Really, you might want to consider the .223 over the 222 cartridge. The .223 brass is no much more available and dirt cheap. Good-luck...BCB | |||
|
| one of us |
smed- I don't have an OTT barrel ....guys that do swear by them. I am thinking my next one will be from Mike. But I have a couple Bullberrys, couple of VVCG (no longer around), sseveral factory barrels and now going to have two MGMs. All are excellent shooters. My .221 is a Bullberry full bull CM. | |||
|
One of Us |
I have 3 of bullberrys barrels all shoot very well and they make 6-7 different contours from bull down. They are very nice people to deal with and about 4 months for a barrel. Hoeram  NRA Benefactor Member USAF Ret. | |||
|
| One of Us |
Thanks hoeram! I decided on an OTT. After looking at what he is doing with an EDM and beings a machinist (among other thing) I like the concept and I don't think there is a more accurate way to chamber. I will be sending you a PM as I am more or less a neighbor. (property in E. WA) Smedley ______________________ Smedley ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
| One of Us |
Excellent choice on the OTT. I just got a 14" 222 fluted OTT and I love it. I should be receiving a 5mm Remington Craig conversion in the same configuration except the lug is being cut with a smaller pin diameter for a Armour Alloy frame. The flutes aren't needed but they sure look really nice. Only bad thing about OTT is the wait. But like stated above, it is certainly worth it. | |||
|
| One of Us |
Smedley, good choice on the OTT. I've exchanged emails with him today about a .357 Magnum barrel. I'm planning to get a 10-12 inch matte barrel with flutes. He said that the diameter is .810, rather than one inch. Let us know how it shoots. I hope to get a .223 from Mike next. | |||
|
One of Us |
any body have a web site address for ott. used to have them on my favorites list but now i get nothing. thanx for any help. PLEASE EXCUSE CAPS, HANDICAPPED TYPIST. "THE" THREAD KILLER IT'S OK......I'VE STARTED UP MY MEDS AGAIN. THEY SHOULD TAKE EFFECT IN ABOUT A WEEK. (STACI-2006) HAPPY TRAILS HANDLOADS ARE LIKE UNDERWEAR....BE CAREFUL WHO YOU SWAP WITH. BILL | |||
|
| one of us |
OTT's site is: www.ottllc.com | |||
|
| One of Us |
Just a quick update folks: The FL die, the NS die, four rounds (dummy), three virgin and three FL brass shipped to OTT with the order request form!!  In the process of picking up a Burris 3-12 handgun scope for it. Already have mount and rings. Smedley ______________________ Smedley ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
| one of us |
What is the delivery on an OTT barrel. You need to post a picture for us when you get it put together. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia