The Accurate Reloading Forums
Tried a new powder in the 16.5" 300 Mag

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6121043/m/58610759

04 September 2003, 13:35
T/C Nut
Tried a new powder in the 16.5" 300 Mag
I tried some Varget with a 165gr Speer SP groups ran about an 1" to 1 1/8" @100 Not sure about the velocity but,I will check it soon and let you guy's know.
05 September 2003, 12:26
T/C Nut
Well here it is..

165gr Speer SP
57grs Varget
2,590fps
Hmmmmmm may try a little more powder.Anyone have a clue on what powder to try next..? For better velocity. *NOTE* Same load in my 26" tube went 2810fps that's only 220fps faster than the 16.5" pistol. [Eek!]
08 September 2003, 11:48
Fiftydriver
T/C Nut,

If you are shooting a 300 Mag(Win ?) I feel you are using much to fast a powder. For that bullet weight go up to something on the lies of 4350, RL-19 or RL-22.

These powders are just barely on the fast side for heavy bullets in a 300 but for the 150-165, they will prove better suited in the short barrel, also muzzle blast will increase but so will velocity, nothin' for free I guess.

Tfy some powders in that burn rate and see what happens, I'm sure they will out run Varget by quite a bit and pressures will be easier to manage.

Good Shooting!!!

50
08 September 2003, 13:08
T/C Nut
quote:
Originally posted by Fiftydriver:
T/C Nut,

If you are shooting a 300 Mag(Win ?) I feel you are using much to fast a powder. For that bullet weight go up to something on the lies of 4350, RL-19 or RL-22.

These powders are just barely on the fast side for heavy bullets in a 300 but for the 150-165, they will prove better suited in the short barrel, also muzzle blast will increase but so will velocity, nothin' for free I guess.

Tfy some powders in that burn rate and see what happens, I'm sure they will out run Varget by quite a bit and pressures will be easier to manage.

Good Shooting!!!

50

I have tried 4350 with 180's 165's and 150's..
Velocity was..
2680fps...180's
2687fps...165's pressure was starting to get high.
2870fps...150's I did get 2900fps with XLC's
-------------------------------------------------
I have tried 4064 that was better with 165's and 150's.Avg. velocity ran 2766 to 2810 with less powder.
08 September 2003, 14:30
Albert T. Tomblin
T/C Nut try IMR4350 and the 165 Nosler Ballist tip bullet, they work great in my 15" Encore with 2600fps velocity, and 1 inch groups or less.
Albert
08 September 2003, 14:53
T/C Nut
quote:
Originally posted by Albert T. Tomblin:
T/C Nut try IMR4350 and the 165 Nosler Ballist tip bullet, they work great in my 15" Encore with 2600fps velocity, and 1 inch groups or less.
Albert

That's the powder I have been trying IMR4350 and IMR4064.IMR4064 gave better velocity with 165's and 150's velocity runs 2766 to 2810