THE ACCURATERELOADING.COM SINGLE SHOT PISTOLS FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Split lug replacement
 Login/Join
 
one of us
Picture of TCLouis
posted
I got to seriously reviewing each of my barrels the other day and noticed several that have one piece lugs. They all open ok on either of my frames so is there any real reason to change them out?
LouisB
 
Posts: 4271 | Location: TN USA | Registered: 17 March 2002Reply With Quote
one of us
Picture of contender85
posted Hide Post
LouisB
In my opinion, as long as they work OK I don't see any reason to change them. I have a solid lug in my 10" 222 barrel and it wont open.....I know others say they have had good luck with T/C sending them new ones, but I called them the other day and the tech. I spoke with said, I need to send in the barrel to have it replaced because there are 3 different sized lugs and they (especially the Contender barrels) need to be gauged so they can get the correct one installed, I then told him that I had called one other time and had one sent to me(cost me $12.00) and his reply was,"they really shouldn't be doing that"
So, it looks as though I'll have to send it in...Anyone else run into this before?
Mark [Confused]
 
Posts: 414 | Location: Western NC | Registered: 07 April 2002Reply With Quote
one of us
Picture of Magnum Mike
posted Hide Post
quote:
Originally posted by contender85:
.....I know others say they have had good luck with T/C sending them new ones, but I called them the other day and the tech. I spoke with said, I need to send in the barrel to have it replaced because there are 3 different sized lugs and they (especially the Contender barrels) need to be gauged so they can get the correct one installed, I then told him that I had called one other time and had one sent to me(cost me $12.00) and his reply was,"they really shouldn't be doing that"
So, it looks as though I'll have to send it in...Anyone else run into this before?
Mark [Confused]

I called them about 3 months ago and they sent me a set at no charge!! I had them in 2 days as they sent the USPS Priority. [Confused] Not sure if they changed their policy on this or what?!?!?!?!?!? Weird.....
 
Posts: 1574 | Location: Western Pennsylvania | Registered: 12 September 2002Reply With Quote
one of us
posted Hide Post
Ain't this a deal? TC has sent me (Tim P.) locking lugs to replace some solid ones, no charge. The first ones they sent me were blue, put them in and they wouldn't work either. Called them back and told them I had taken a set out of another barrel and no problem. The only difference was they looked like a matte SS, I told them this and they assured me they only had a standard lug that they used in ALL their barrels. Another couple of days a package shows up from TC, what do you know a set of lugs that looked like alloy or a matte SS???? They worked fine.
Called them a few weeks back, wanting some screw blinds, free, yeah right. I wanted two but the freight was going to be more than the screws.
Oh well.
Jeff
 
Posts: 655 | Location: Kansas US of A | Registered: 03 March 2002Reply With Quote
<Rory Rich>
posted
I had TC send me a new set of lugs and wasn't charged anything.. Later apx . a month ago i asked for 6 sets to replace the lugs on my older barrels ..again no charge.I sent a set to Buckwheat for one of his barrels.
I the past i was even sent undersized lugs for a barrel I had ( 2 sets) I was told TC had unsized lugs in 3 sizes?
Last week I requested 2 sets of dovetail locks and was sent those free also..
I'm starting to feel quility about the free items TC has sent me..They even sent me a parts and price list via e-mail..I have had no problems with this company or Fox Ridge...Rory
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia