The Accurate Reloading Forums
Burris 3-12 on TC contender barrel, rings?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6121043/m/528108514

31 January 2006, 00:30
skid2964
Burris 3-12 on TC contender barrel, rings?
I have a Contender barrel and will be putting a Burris 3-12 AO scope on it. I usually use Burris Zee rings "low" (weaver type)... does this Burris scope usually require more clearance? requiring the "medium" rings? I need to order them and want to get the correct height rings.

The mount is a Virgin Valley six screw weaver type. I think it sets a tad lower than a regular weaver brand mount.
31 January 2006, 21:41
Rusty Hook
If those rings have worked with scopes with similar sized objective lenses in the past, they should work OK with the Burris 3 to 12. The adjustable objective doesn't take up that much space.

I used the high rings on my Encore. Not for barrel clerance but to have more room to cock the hammer under my 3 to 12 Burris scope. Your milage may vary in that regard...Rusty
02 February 2006, 21:40
jeff223
i dont have a 3-12 burris but i have a 3-9 with AO and i went with the medium rings.you can get in with your thumb to pull the hammer back too.i dont like the hammer extentions on the TCs

the 3-9 is about the same size as the 3-12


IM JUST ANOTHER ONE THATS BEEN BANNED BY GRAYBEARD!!A TROUBLE MAKER
02 February 2006, 23:53
Rusty Hook
Jeff: I went with the high rings because I wanted to be able to cock the hammer with a fairly thick pair of gloves on, your milage may vary...Rusty.