THE ACCURATERELOADING.COM SINGLE SHOT PISTOLS FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
444 marlin
 Login/Join
 
<ty>
posted
can anybody suggest a good powder for the 444 marlin?I tried reloader-7 with WLR primers
and my groups? or pattern was terrible.I am loading a 240 hornady xtp.I'm shooting a rechambered 14 inch 44 mag contender
any help would be appreciated
 
Reply With Quote
one of us
posted Hide Post
TY,
I don't have a contender, But my rifle really likes h4198 and that bullet. I got the load data directly from the hogdon sight. Hope this helps.
JT
 
Posts: 28 | Location: bedford, pa | Registered: 03 February 2002Reply With Quote
one of us
Picture of T/C Nut
posted Hide Post
Yep,H-4198 my Super-14 44Mag rechambered to 444 love's it.With a 240gr XTP and 47.2grs of H-4198 Rem. 9 1/2 primer velocity runs 2156fps over the chrono.This load is 2grs under MAX.
 
Posts: 608 | Location: Washington | Registered: 28 May 2003Reply With Quote
one of us
posted Hide Post
it may be the barrel [Frown] i hae a 44 tc barrel that
patterns [Frown] with every thing i try [Confused]
 
Posts: 63 | Location: ga | Registered: 12 November 2002Reply With Quote
one of us
posted Hide Post


[ 09-25-2003, 19:26: Message edited by: sr25 ]
 
Posts: 63 | Location: ga | Registered: 12 November 2002Reply With Quote
one of us
Picture of Magnum Mike
posted Hide Post
I have used (and still use) AA2015 with EXCELLENT results! The load i am shooting is a Nosler 240jhp, 53.0 AA2015, Rem cases with a WLR primer. Sub MOA 3 shot groups at 100 yards from my OTT rechambered 444. I am now workin with a 310 gas checked bullet (that i cast meself [Wink] ) and and impressed with the initial results. I believe that there are a few shooters on the Specialty Pistol board (link below) that have rechambered barrels....
 
Posts: 1574 | Location: Western Pennsylvania | Registered: 12 September 2002Reply With Quote
one of us
posted Hide Post
Don't pass on H322. It's good stuff in the triple 4.
 
Posts: 1902 | Location: Va. Beach,Va. | Registered: 10 March 2002Reply With Quote
<ty>
posted
Thanks for the replies,now I have a good place to start..
 
Reply With Quote
one of us
posted Hide Post
TY- I use H-322 also with a 300gr JDJ design cast bullet in my rechambered 14" Contender and it shoots rather well, 1 to 1 1/2 inch groups.

Albert
 
Posts: 98 | Location: Kenova WV | Registered: 24 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia