The Accurate Reloading Forums
Remington 35 Cal 150gr bullets

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6121043/m/43010059

26 April 2003, 05:57
<Paul Dustin>
Remington 35 Cal 150gr bullets
I have 19,000 Remington 35 Cal 150gr bullets left. If you would like to order some please e-mail me at gunner7243@yahoo.com. This is one of the best bullets for handgun like the 357 MAX or 357 Herrett,35 Remington, and 385 Winchester.
These bullets will sale for 1000pc $114.25 + shipping 500pc for $58.00 + shipping and 100pc for 13.50 + shipping.OBO

[ 05-04-2003, 07:59: Message edited by: Paul Dustin ]
04 May 2003, 17:00
<Paul Dustin>
I'm down to 14,000 Remington 35 Cal 150gr bullets left.
11 May 2003, 09:59
<Fisher>
Now that we have 36,000 of these bullets out there. Has anyone had the chance to load and shoot them in the .357 max. yet. The only load data that I have run across with the 150 grain bullets is in an old Hodgdon manual. It lists 23grains of H4227 under the 150 grain bullet with a velosity of 1924 fps. It shows this as a compressed load. It also states that this load data is from a 10 1/2" barrel. Does anyone have a better starting point then the above load. My barrel is 15" long so I am assuming my velocity will be faster. I'm just not sure about the pressure. [Eek!]

Thanks again Paul for putting the big bucks on the line and ordering these for everyone.

[ 05-11-2003, 05:59: Message edited by: Fisher ]
12 May 2003, 09:30
Magnum Mike
I would start with "start load" data for 158's using H110, W296 or AA1680 and work up from there. You should be able to achieve better velocity than that.....
12 May 2003, 17:29
buckweet
anyone have a load that they useing with these 150's in the herrett ???
buckweet
13 May 2003, 01:32
Nashcat
You might check this link.

357 Herret loads at Steve's Pages

Nashcat
18 May 2003, 22:01
<Paul Dustin>
I'm down to 10,000 Remington 35 Cal 150gr bullets left.