Go | New | Find | Notify | Tools | Reply |
new member |
does anyone know a custom barrel maker for tc encore looking for a 15" with 1 in 9 twist in 25 wssm thanks | ||
|
one of us |
I HIGHLY recommend Match Grade Machine (www.matchgrademachine.com). Check with them first. The quality is top-rate, and the turnaround is pretty quick. They also have a section of current barrels that are chambered and ready to go -- often at reduced rate and without the wait of a conventional order. Bobby Μολὼν λαβέ The most important thing in life is not what we do but how and why we do it. - Nana Mouskouri | |||
|
One of Us |
A couple of others are: SSK Industries On Target Technologies | |||
|
One of Us |
I you are going to find that most custom barrel makers are going to refuse to chamber the 25 WSSM because of back thrust and pressure issues in the Encores. You might consider necking the new 300 RCM (Ruger Compact Magnums developed by Hornady) down to 25 caliber as it has the standard magnum case head size that the Encores and Ruger No 1s can safely handle. Here are a couple of links for anyone interested in this topic to read: http://www.eabco.com/WSM01.htm http://www.ottllc.com/FAQ.html Q:Just how big of a cartridge can you build on the Encore frame? NOTE:10-20-06 We have discontinued any Weatherby Chamberings for the T/C Encores. A:The main criteria with the T/C Encore & Contender is pressure. Some of the old BP cartridges are HUGE and yet operate under very low pressures. With modern day cartridges such as the WSMs,RUMs,SAUMs etc. the pressure is bordering on EXTREME (for the break action firearms) with factory ammunition. When choosing a cartridge for your Encore please pay attention to the web area dimension on your case. We prefer around .513 as it seems to be about perfect for the Encore. NOTE: On belted cases, check your measurements just above the belt. Once you get to .550 like in the RUMs and WSMs, the factory ammo is hot and more clearance is necessary to extract the case. Then, if handloading, factory velocities will not be achieved before the pressures stop you again. Handloaders have a few more options as they can control pressures a bit over factory loadings. However, Factory velocities will not be achieved with these cartridge/barrel combinations in the T/C Encores. We will work on an individual basis when these cartridges are being considered for the T/C Encores. ...Rusty | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia