THE ACCURATERELOADING.COM DOWN UNDER FORUM


Moderators: Bakes
Go
New
Find
Notify
Tools
Reply
  
Sako blow up
 Login/Join
 
one of us
posted
I have pics of a Sako synthetic in 300 win mag that blew up on 15th shot from new using factory ammo.

the pics are 1.8meg in total anyone willing to host and post them?
 
Posts: 787 | Location: Melbourne, Australia | Registered: 15 January 2002Reply With Quote
Administrator
posted Hide Post
Did this happen to you, or someone you know, or is this the same one posted on the net a while ago?

The one I have seen had the action split into two pieces lengthways, and the barrel into 3 pieces.
 
Posts: 69652 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Hay.!! Sako ? Action's ? whaaa what where when
please when did all this start happening is there somthing i need to know that's been keep from the public

The reason i am asking this guy's is that i just ordered two Sako's .. there new older Sako's in 30-378
i was.?! going to convert them over to a diffrent case
/Rechambering..


let me know i have not seen anything on this .!
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
Administrator
posted Hide Post
Martin,

I have the photos, and will post them tomorrow - I cannot upload anything from this computer.

There is something very funny about that accident.

The action split in half lengthways, and teh barrel looks like it split into three pieces - lengthways too!

I would not worry about your Sakos. I have several dozens of them here, and I have absolutely no worry about shooting them.

The funny part was that I heard of a custom built rifle - again on a Sako action - chambered for the 416 Remington. That has blown up too.

I don't know what caused that accident, but some reports I have heard talked of teh flutes being too deep, and too close to the chamber.

Of course, this is all speculation, and I hope one day we will get to the bottom of it.
 
Posts: 69652 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Saeed, Im not sure but I believe the Sako you are going to post pictures of was customized. I believe I read somewhere that the owner had the barrel fluted. Could be the fluting was a little to aggressive and too much metal was removed for it to stand the pressure and that is why the barrel split lengthwise probably than taking the receiver with it in the same fashion. I'm not sure about this though.>John
 
Posts: 725 | Location: Upstate Rural NY | Registered: 16 July 2004Reply With Quote
one of us
posted Hide Post
Saeed
Sounds like it might be the same one, I will ask the guy that sent it to me if he knows the guy that senty it to him.
Yes action in 2 and barrel in 3 length ways. There are 8 pics all together.
 
Posts: 787 | Location: Melbourne, Australia | Registered: 15 January 2002Reply With Quote
one of us
posted Hide Post
The reason i asked Saeed was these two were going to be
rebarreled and rechambered for 50/460's

Yik's i don't want to have to wory about eating the action
every time i pull the trigger on these i will be flinching enough as it is..
And i won't be flutting the barrel's i was going to go a kinda light 850 crown on the barrels 26 inch and just drill port them
The whole cost pre gun was /is only around 1400.00 each
but if there's somthing wrong with these type's of action's PLEASE let me know ...

thank's again for the head's up on the action's
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
one of us
posted Hide Post
I've got those pictures saved at home. I will post them when I finish at work tonight, unless Saeed beats me to it.
JCN
The flutes in the picture look pretty deep, but I don't know if they were done after purchase or at the factory.
 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
posted Hide Post
Matin,

No worries mate. I have shot tens of thousands of rounds through Sako's from pre 72 Garcia models up through the new 75's, and fromm .22 rimfire up through a 375 Weatherby to 416 Rem Mag chamberings.

Put a good quality (Krieger comes to mind, I can't think of any other barrel makers ) barrel on it. Don't have the barrel fluted. You can run anything through those actions. Just keep the pressure under 65,000 psi, and you will never have a lick of trouble.

Barrel flutes are only there so the grizzly bear can remove your hemorrhoids when he shoves your rifle up your ass if you didn't kill with the first shot. Can't think of another reason for them.

JCN
 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
posted Hide Post
Pardon me for saying this please But

HOLY CRAP.!!!!

Ok now that REALLY bug's me .!!
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
One of Us
posted Hide Post
Marin I was thinking of stronger words than that! Like "F me to tears?"
That is pretty catastrophic for a blow up and I CANNOT see a factory weapon doing that unaided somehow. I really don't think you will have a problem similar to that. derf
 
Posts: 3450 | Location: Aldergrove,BC,Canada | Registered: 22 February 2003Reply With Quote
one of us
posted Hide Post
Yep
Those are the pics in question
 
Posts: 787 | Location: Melbourne, Australia | Registered: 15 January 2002Reply With Quote
one of us
posted Hide Post
Thank's for the insite lol
 
Posts: 1557 | Location: Home of the original swage | Registered: 29 February 2004Reply With Quote
one of us
posted Hide Post
Yes sir,
Here is your rifle in kit form:



This is the Tri-Lite barrel assembly. Those extra wide vents allow the barrel to stay cooler over long shot strings:



The patented Bi-winged action modification makes cleaning those little out of the way nooks and crannies a breeze!:



In the spring of the year the cartridge pupa splits open and the butterfly bullet flutters downrange:

 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
Picture of Bad Ass Wallace
posted Hide Post
One Sako; at least they found all the bits





What completely puzzles is how and why the action split in half!
 
Posts: 1785 | Location: Kingaroy, Australia | Registered: 29 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia