This build started out as a nice 1963 custom long-range rifle with a fat gawdy looking stock, heavy Douglas sporter barrel and a Bueller low profile safety with minor wear on the bluing. I bought a premium stock from Wenig's and trimmed it down, bedded the action and base of the barrel with Acraglass & free floated most of the barrel and applied 10+ coats of Birchwood-Casey oil with a fine rub in between filling the pores. Additional work included polishing of the metal & bolt raceway to a smooth operation, fine-tuning of the Timney trigger down to 2 pounds pull with minimal overtravel and a hot re-blue. Tim Smith-Lyon did the fine 22 LPI checkering. The bottom metal is an aluminum one that I had trimmed down and applied a black Rustoleum finish. I only took it in the field three times, one of which scored me a PA whitetail buck. Since then, it has sat here not being used.
Condition is near excellent and it will shoot around 1 inch groups at 100 yards using my reloads. Recipe is included. The scope IS NOT included. The 1 inch scope rings and bases are included.
NOTE: There is one scar on the cheek piece that I will repair to where it will not be detectable. Asking $1100.
Face to face Cash preferred. Will ship for $59 to the lower 48.

A few more.

What is the LOP?

Not to lowball you but with Christmas and taxes coming up I can go $1,000 plus shipping. If so, I’ll take it. Mike

Sold to FT pending funds.

FT Length of pull is 13.75" to the center of the pad. PM to follow shortly.

Deal! I’ll PM you with my address and you can provide me with address to send payment. Thank you, Mike

Mike,

PM's were re-sent. Didn't go through the first time.

RC