THE ACCURATERELOADING.COM EUROPEAN HUNTING FORUMS


Moderators: Pete E
Go
New
Find
Notify
Tools
Reply
  
Ultrasonic Cleaner?
 Login/Join
 
One of Us
Picture of nightwalker uk
posted
Fellas, just interested in whether anybody else has gon down the root of using ultrasonic cleaners for cleaning cases and if so what has been your experiences and observations?

Particularly interested in what liquid you are using to clean with.

Have done some 7-08 cases tonight with my new toy and have mixed feelings about it? Some are brilliant whilst others have taken on a mottled appearance - using a vinegar mix then into bicarbonate of soda mix to neutralise the acid - then my machine stopped working!!

Cheers NW
 
Posts: 418 | Location: Derbyshire, England | Registered: 09 January 2005Reply With Quote
One of Us
posted Hide Post
NW.

l'm on a tablespoon of cilit bang "grime n lime" in 1/2 pint of warm water. l try to keep solution fairly clean as it can cause mottled cases if l try to run too many cases through one batch of liquid. Rinse through a couple of times and then onto the back of the aga overnight.
 
Posts: 386 | Location: Displaced Yorkshireman | Registered: 16 October 2004Reply With Quote
One of Us
posted Hide Post
I use a level tablespoon of citric acid crystals to a litre of water and a drop of washing up liquid to increase wettability, run a short cycle to disperse the air bubbles and dissolve the crystals then do the cases in relatively small batches, say 25 at a time. Rinse in warm water 2 - 3 times and then dry overnight. I then give them an hour in walnut media / tumbler and they are like new, inside and out, primer holes included.

Citric acid is not as aggressive as vinegar, and I get no pink traces that would indicate acid attack on the copper part of the brass alloy material.

My U/T unit is a small one , it was about £50 off flea bay, but it is adequate for the number of cases that I have to deal with.

T260
 
Posts: 56 | Location: UK | Registered: 08 January 2006Reply With Quote
One of Us
Picture of nightwalker uk
posted Hide Post
quote:
Originally posted by Tikka260:
I use a level tablespoon of citric acid crystals to a litre of water and a drop of washing up liquid to increase wettability, run a short cycle to disperse the air bubbles and dissolve the crystals then do the cases in relatively small batches, say 25 at a time. Rinse in warm water 2 - 3 times and then dry overnight. I then give them an hour in walnut media / tumbler and they are like new, inside and out, primer holes included.

Citric acid is not as aggressive as vinegar, and I get no pink traces that would indicate acid attack on the copper part of the brass alloy material.

My U/T unit is a small one , it was about £50 off flea bay, but it is adequate for the number of cases that I have to deal with.

T260


Sounds good, where do I buy Citric Acid Crystals from?

Does it really get the carbon out as well as you say? Have you found warm water better or cold, just my unit has a water heater on it...
 
Posts: 418 | Location: Derbyshire, England | Registered: 09 January 2005Reply With Quote
One of Us
posted Hide Post
I use the same method with Citric Acid Crystals in hot water from a electric kettle, here in DK we can get the Citric Acid Crystals from a material handler (matas.dk)
After this process I run them in my tumbler
with pudding rice and Brasso.
A tip before you mix pudding rice and Brasso you should dry the rice in the oven, otherwise it’ll be a pudding in your tumbler stir
After this you brass will look newer than new, and another good thing is that weak points in your brass will be easier to spot when they’re that shiny
quote:
Originally posted by nightwalker uk:
Sounds good, where do I buy Citric Acid Crystals from?

Does it really get the carbon out as well as you say? Have you found warm water better or cold, just my unit has a water heater on it...


Thanks Bjarne
 
Posts: 185 | Location: Randers - Denmark | Registered: 17 November 2007Reply With Quote
One of Us
posted Hide Post
NW

I get the citric acid crystals from Home Brew shops, or maybe Boots dispensary ? Indian food shops keep it as well, so it shouldn't be a problem in Derby ?

BR
 
Posts: 56 | Location: UK | Registered: 08 January 2006Reply With Quote
one of us
posted Hide Post
Tumbler, walnut husks, jewellers rouge.

Dump them in - sieve them out - job done.

Open can of applause and wonder at your gorgeous, low effort brass! Smiler



Rgds Ian (Ramsey to my mates!) Smiler


Just taking my rifle for a walk!........
 
Posts: 1308 | Location: Devon, UK | Registered: 21 August 2001Reply With Quote
One of Us
Picture of nightwalker uk
posted Hide Post
Have used that method for a good few years now Ian, but never liked the issue of caked carbon inside cases and also on the ID of the neck (brushing doesn't touch it and it is inconsistant to the relationship between itself and OD of the bullet) - whether it makes a difference downrange I am not sure - but seeing as I try to eliminate any factors efecting loss of accuracy, then for me it makes sense to clean to the 100th degree.

In time I may go back to tumbling and picking debris out of flash holes and cleaning primer pockets - but for now I want to experiment with the USonic cleaner.

A clean case has got to be a happy case!! Big Grin (and just because its shiny on the outside doesn't mean its clean inside!!)
 
Posts: 418 | Location: Derbyshire, England | Registered: 09 January 2005Reply With Quote
One of Us
posted Hide Post
I bought my ultrasonic cleaner from Maplin and some coconut based cleaning agent with it.
Seems to work.


Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing ever happened. Sir Winston Churchill
 
Posts: 574 | Location: UK | Registered: 13 October 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia