THE ACCURATERELOADING.COM EUROPEAN HUNTING FORUMS


Moderators: Pete E
Go
New
Find
Notify
Tools
Reply
  
6.5x55 load for a ZKK?
 Login/Join
 
One of Us
posted
A friend just gave me an unused ZKK in 6.5x55 Mauser. Does anyone here have a recommended load for these rifles? I just need a starting point. I realize I'll have to tweak the load to the rifle.

I have H4350 and H4831 powder on hand and Hornady Interlock 140 grain bullets right now.
 
Posts: 63 | Registered: 28 January 2011Reply With Quote
One of Us
posted Hide Post
What brass?

Lapua and Norma are the norm and the rest, well they are just behind,

most US-made brass is undersized and will have a lot less volume.

Start with listed starting loads for the powders suggested.

/Chris
 
Posts: 978 | Registered: 13 February 2006Reply With Quote
One of Us
Picture of carpediem4570
posted Hide Post
I am afraid your friend has given you a klunker. shocker

That particular rifle will not hold up to the lightest 6.5 loads and therefore, in the interest of saving you a great deal of grief, you should immediately mail it to me so that I may properly look after it. dancing space


No politician who supports gun control should recieve armed protection paid for by those he is trying to disarm.

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways-scotch in one hand-Chocolate in the other-body thoroughly used up, totally worn out and screaming "WHOO-HOO, WHAT A RIDE!!"

Madly Off In All Directions
 
Posts: 278 | Registered: 11 April 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia