THE ACCURATERELOADING.COM VARMINT HUNTING FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
best shot size
 Login/Join
 
One of Us
Picture of HTR30CAL
posted
what do you feel is the best shot size and choke for coyotes


there is room for all of God's creatures, right on my wall

Wyoming Wolves, Smoke A Pack A Day

Wolves, Government Sponsored Terrorists

If its hungry, send it a Berger
 
Posts: 44 | Location: Wyoming USA | Registered: 22 April 2009Reply With Quote
One of Us
posted Hide Post
i really prefer 6mm shot but i've never choked one hilbily(sorry but it is friday)
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by HTR30CAL:
what do you feel is the best shot size and choke for coyotes

I use 000Buck shot in my 410 if I m in the brush of 2nd growth stand or any rifle I have sighted in with a good load at the time.

I also use 00buck if I can find it. But I have yet to find anything in mass quantity.
I am thinking about reloading shot shell so I can make what I want instead of spending a $1 each shell.

I have to say any deer load will work fine, I would ad void using bird shot unless your under 15yds. One good thing to remember is your own personal ethics, what gets the job done in 1 shot and, your ability to hit the target.
If you have bird shot and that's all you have, personally I wouldn't have any issues of you using it under the 15yds. No reason to have them suffer more then they should. But that's a personally opinion on ethics. Remember that will differ from person to person. Just ask the anti trappers.
A 22LR works well, but you better be a hell of a shot to drop the at over 50yds.
Best place to place the bullet, this also goes for the people who deer hunt, there is no huge shoulder blade to shoot around. When looking at the yote look at the front elbow, draw a straight line up at a 90* angle. Right about in the middle or just above middle is the hart. Just about a 1 shot kill with no run off every time.
Best of luck, keep us posted and send photos if you have any.
James
PS Please excuse my horrid English.
Find me on facebook
http://www.facebook.com/profil...44477475&ref=profile


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
I've had pretty good luck with BB's on shots to 40 yds. or so. I'd suggest patterning about 3 shots to make sure your pattern is sufficiently dense. I've also used #2's and #4 buck with success.


velocity is like a new car, always losing value.
BC is like diamonds, holding value forever.
 
Posts: 1650 | Location: , texas | Registered: 01 August 2008Reply With Quote
One of Us
Picture of TEANCUM
posted Hide Post
#4 buck.....if you can find it.
 
Posts: 1788 | Location: IDAHO | Registered: 12 February 2005Reply With Quote
one of us
Picture of erict
posted Hide Post
My 870 only goes to 3", but for coyotes it's #4 buck out of a full choke. I am also anxious to try Remington HD in BB. You absolutely must try out your load and choke on paper first or you may be in for a big surprise - cheap gift wrapping paper is very good for seeing where your gun patterns.

Besides all the good info you get here, you should also check out PredatorMasters - they have some extensive tests on loads, etc.


.

"Listen more than you speak, and you will hear more stupid things than you say."
 
Posts: 706 | Location: near Albany, NY | Registered: 06 December 2002Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by erict:
My 870 only goes to 3", but for coyotes it's #4 buck out of a full choke. I am also anxious to try Remington HD in BB. You absolutely must try out your load and choke on paper first or you may be in for a big surprise - cheap gift wrapping paper is very good for seeing where your gun patterns.

Besides all the good info you get here, you should also check out PredatorMasters - they have some extensive tests on loads, etc.
I am a member to Predator Masters as well, there is alot of info you can pull from those guys.
They have helped me out many of time.
I recommend getting your hands on as many books as you can on your target critters and also read a few more books on tracking.
That alone will help you out more in the long run along with a good mouth call.
And one last thing, TRIGGER TIME!


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
Picture of Moonshot
posted Hide Post
#4 Buck out of a 12ga., 2 3/4" shell size.

Use the 27 pellets per shell, they fly faster than the 34 pellets per.

Have had good luck out to 50 yds with grouping with a modified choke on a Winchester 1300 pump.

Finally, use straight lead, copper plating gives more penetration but less energy transfer. Coyotes aren't that thick.
 
Posts: 68 | Location: Beaverton, Oregon  | Registered: 20 August 2009Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
What dose anyone recommend on a 410? same deal as the larger bores?


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
one of us
posted Hide Post
Without coming off as a smart butt.........."I don't think anyone recomends a 410" for this duty.............but if I had to use one, I'd recomend #4's in a 3", "fuller than full" choke or a bigger gun. Just my thoughts. GHD


Groundhog Devastation(GHD)
 
Posts: 2495 | Location: SW. VA | Registered: 29 July 2002Reply With Quote
One of Us
Picture of HTR30CAL
posted Hide Post
thanks very much to all of you i will look up predator masters


there is room for all of God's creatures, right on my wall

Wyoming Wolves, Smoke A Pack A Day

Wolves, Government Sponsored Terrorists

If its hungry, send it a Berger
 
Posts: 44 | Location: Wyoming USA | Registered: 22 April 2009Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by groundhog devastation:
Without coming off as a smart butt.........."I don't think anyone recomends a 410" for this duty.............but if I had to use one, I'd recomend #4's in a 3", "fuller than full" choke or a bigger gun. Just my thoughts. GHD

Most of all our hunting is in 2nd growth or under brush here in Maine, most yote kills are under 30yds. Also I have never been a huge fan of the over powered shot guns when I dont need to reach 75yds or more. If I m shoothing that distance I m using my 30-06 or 6.5x55.


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
one of us
Picture of Bob in TX
posted Hide Post
#4 buck or copper plated bb's..........

Hevi-Shot Dead Coyote is great, but expensive!

Bob


There is room for all of God's creatures....right next to the mashed potatoes.
http://texaspredatorposse.ipbhost.com/
 
Posts: 3065 | Location: Hondo, Texas USA | Registered: 28 August 2001Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
Whats best for pelt preservation?
Hope I havnt stolen your thread! Truly Sorry!


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
one of us
posted Hide Post
James, Did not mean to ruffle any feathers with my reply earlier. Back when the 3 1/2 inch shotguns(12 guage) were introduced, a guy came into the gun shop one day and was "hell bent for leather" that he needed a 3.5" chambered shotgun for turkeys. I told him that it was not necessary! I could show him 48 long beards on a wall that had all been shot with a Remington 870 YOUTH MODEL 20 guage! It was all about the calling and gettin them in close and that was the thrill. I asked him "Why do you think you need a 3.5"? His answer shut me up!! He said, "Because they don't make a 4 inch!!" I walked away thinking "Roy Weatherby would have loved this guy or vice-versa." GHD


Groundhog Devastation(GHD)
 
Posts: 2495 | Location: SW. VA | Registered: 29 July 2002Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by groundhog devastation:
James, Did not mean to ruffle any feathers with my reply earlier. Back when the 3 1/2 inch shotguns(12 guage) were introduced, a guy came into the gun shop one day and was "hell bent for leather" that he needed a 3.5" chambered shotgun for turkeys. I told him that it was not necessary! I could show him 48 long beards on a wall that had all been shot with a Remington 870 YOUTH MODEL 20 guage! It was all about the calling and gettin them in close and that was the thrill. I asked him "Why do you think you need a 3.5"? His answer shut me up!! He said, "Because they don't make a 4 inch!!" I walked away thinking "Roy Weatherby would have loved this guy or vice-versa." GHD

Didnt bother me any. good story too beer


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
When I was a youngster I shot a rifled slug in my .410 Ithica when hunting Coyote.
 
Posts: 656 | Location: Nebraska | Registered: 06 January 2007Reply With Quote
One of Us
posted Hide Post
I have a 10ga for geese and late season ducks and when the snow flies Remington express lead BB from that big 10 will roll those yodlers at 70 yards. The velocity is not that great, but lead BB penetrates wonderfully in mammals (except beaver) and the pattern from regular old invector plus mod. is dense enough to block out the moon.
 
Posts: 849 | Location: MN | Registered: 11 March 2009Reply With Quote
one of us
Picture of buckeyeshooter
posted Hide Post
I shoot a 10 guage and use BB's or #2's.
 
Posts: 5721 | Location: Ohio | Registered: 02 April 2003Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
quote:
Originally posted by buckeyeshooter:
I shoot a 10 guage and use BB's or #2's.

HOTDAMN!!! Def not looking to keep that pelt!
beer
Hope your not compinsating for something Wink
hilbily


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia