I'M THINKING I MIGHT GET A BOLT ACTION .22 LR RIFLE WHAT DO YOU SUGGEST FOR A MAN ON A BUDGET?? THINX IN ADVANCE......................

CZ 452 series. American for carrying, Varmint for shooting from the bench. They're inexpensive (relatively speaking) and well known for out of the box accuracy.

-Rick

Yep,
What rduncan said.
Jeff

452 cz for sure!

Depends on your budget, if it is tight, than look at Savage mark II, works fine, you can do a simple fix on the trigger and get a crisp little shooter.

On the real inexpensive side, you could check out the Romanian 22 surplus rifles. They shoot fairly accurately and sell for about $70.00. Not much to look at but they do work.

Tasco,

I second the opinion on the CZ 452. I bought the Lux model, paid $289, put a set of Millet rings/mounts and a Bushnell 4-12 Trophy on it. Accuracy has been amazing to put it mildly. I also modified the trigger to 2.5 lbs by installing a "Brookie" kit see CZ-452 Rifle Improvements

I ran a comparison of about 15 different brands of 22 ammo and even the cheapest WalMart special Winchester or Federals averaged 2" at 50 yards which is perfectly acceptable for casual plinking. Any of the higher quality target grade ammo averaged less than 3/4 to 1" at 50 yards. You can't go wrong with the CZ for the money. If you want to save some funds look at their standard models which are less expensive and have plain wood. I have been really happy with mine.

See their Web site CZ Rimfire Rifles

Good luck

Paul

THANX GUYS I CHECKED OUT THE SITE THAT PAUL REED SUGGESTED. NICE LOOKING GUNS. CZECH REPUBLIC HUH? I'M KINDA SURPRISED BY WHERE THEY COME FROM.

Although I don't own one; several of the rimfire silhouette shooters at my club own and shoot the CZ's successfully. I have shot one several times and the "funny looking" hogback stock comes to the shoulder well and the iron sights align very quickly. They shoot competitively in the iron sight bolt group. If you put a scope on one the stock may feel a little low as it seems to be designed with the amount of drop to align with the iron sights.
The safety is odd though.
I shoot an old Remington 510 targetmaster with a williams peep in iron sighted bolt. If you can find a 510 for under $150 in clean condition; that would be my choice.

[ 08-03-2003, 07:42: Message edited by: Old & Slow ]

Can`t go wrong with a Marlin or Savage bolt action rifle.They are less than $150 at Walmart.

The basic 452 CZ, 24 inch barrel. has a sight like on a Mauser on the middle of the barrel, and a basic hardwood stock, but only $199.00 at most good gun shops.

Seems from above the opinion is highly shared by other CZ 452 owners.

On mine's maiden field voyage, it shot over 1100 ground squirrels in two days and missed about 10% of the time, mainly at distance well in excess of 100 yds, but the follow up shots usually hit target when I did a little kentucky windage on them. Used a 2 x 7 Weaver rimfire scope on that trip, but since replaced with a Leupold, strictly because of eye strain after 2 days squinting thru a Weaver rimfire ( still is a good scope)

[ 08-04-2003, 20:11: Message edited by: seafire ]

I have one of those $70 Romanian Model 1969 trainers. It is suprisingly accurate. But I think a CZ will beat it.

I agree with the CZ452 selectioin. It's one of the best. I believe this used to be marketed under the Brno name. Other good choices are the Anschutz and Kimber rifles, but these are
rather pricey offerings. Best wishes.

Cal - Montreal

Tasco74 - The Czech Republic has had a reputation for arms making that is unmatched. The first place Hitler invaded was that part of the world, primarily to get control of their arms-making facilities. I've owned and shot a variety of Czech-built arms since 1982 and I've never been dissatisfied. The pre-1990 pieces tend to be rather plainly finished, except for the wood. They still have access to Circassian Walnut, and if you win the Brno/CZ "lottery" you have a good chance of getting a truly marvelous piece of wood attached to your fine, accurate rifle.

I don't think you'll be disappointed, if you go Brno/CZ.

Tasco74
Looks like a blowout for the C.Z. 452. I have one in the American model and must agree with everyone else. If money is a big issue, the plainer training models with the euro type beech wood stock and mauser type iron sights are just as accurate and usually run under $200. In any configuration these rifles will outshoot anything costing up to 3 times the price, and the solid design and good materials will last more than one lifetime.

Ive got a Savage Mark II, it was $100,00 at Wal Mart. I put a set of 1" rings and a Weaver 4X scope on and its painfully accurate. If you can deal with a 22 with a tupperware stock its an excellent shooter.

HUMMMM SAVAGE MARK II SOUNDS INTERESTING..... I LIKE TO BUY U.S. MADE STUFF IF I CAN AND EVEN BETTER IF IT'S LOCALLY MADE. ACCURATE IS IT??
I'LL LOOK INTO IT . THANX. BTW HOW LONG AGO WAS IT YOU GOT THIS RIFLE??

Did'nt Savage aquire Lakeside Mfg in Canada the mahers of .22 rifles a few years back.....My vote still goes to the CZ-452.....Keeps up with my Rem. 541 and bested my ruger 77/22.

I'd get a marlin 880SQ it has a bull barrel sub moa groups out of the box, and you can find it on the internet for $180 at (www.guwholesale.com/Rifle/Marlin.htm /> skinner