61.0 grs RL-19, 150gr Nosler BT, CCI250 prim, in
Win cases. 0.5 groups in Browning A-Bolt 26" bbl.
Set 0.020" off lands. Groups same verticle as factory Rem 150 core-loks advertised velocity of
3110 fps. I do not have access to a chronograph
but I'm guessing this velocity is close. Groups
start to open to 1" at 62.0 grs RL-19. Anyone else
tried this load yet? I would be interested in your
velocity!

I've used RL-19 with 140's, chroned at 3200fps, will have to look up the powder charge, don't remember.

Best Load I have used in my 7 mm Mag is IMR 4350/RL 19 with 61.0 and Fed 215GM primers with 160 SBT. followed by 63.0 of the same powder with 150 Nosler Part.

[ 02-17-2003, 08:18: Message edited by: Alaska Bush Man ]

BLR, I have used and get great results from 3 different 7mmMags with 65.5 Reloader 19 and the Hornady 139 grain Spire Points. 3 different Remington 700's all getting .6-.75 inch groups! I chronographed this load @ 3342 from the 24 inch barrels! Also my personal 7mmMag likes 61.5 grains of Reloader 19 behind the 160 Sierra HP Game King. It has done .651 @ 200 yards with that load. That's about all I ever load anymore for it! No use to try to improve on that with the rifle being a 700ADL Synthetic!! GHD