The Accurate Reloading Forums
405 winchester 300 Barnes

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/5771013412

29 September 2015, 05:16
savage300phd
405 winchester 300 Barnes
I finally broke down and purchased some 300 gr TSX barnes bullets to try out of my Ruger #1 chambered in 405 winchester. Getting good groups out of cast but wanted something better for 200 yards. I am amazed at the Barnes TSX. Groups were three shots only. I settled on 55.0 grains R15. 100 yard group measured .687" outside to outside. At 200 the three shot group measured 1.790" outside to outside. ready for deer and elk this year. Dreaming of Namibia next year. Would like to hear from somebody if they have used this combination in Africa and how it performed. It will be my first trip, plains game only.
25 October 2015, 22:58
Clan_Colla
the bullet also performs well from my Miroku Winchester 405 running Varget
31 March 2016, 00:27
crshelton
also in my Miroku 1895 .405 using VV N133 at 2250 fps.

Conclusion, it is a good and accurate bullet for the .405.


NRA Life Benefactor Member,
DRSS, DWWC, Whittington
Center,Android Reloading
Ballistics App at
http://www.xplat.net/
13 May 2016, 08:27
Snellstrom
I plan on trying that bullet in my 400 Whelen, I hear some guys are running it in the 400 H&H's too.
26 May 2016, 21:21
Doubless
What is the diameter of that Barnes? The groove diameter of the 400 H&H is .411"...
27 May 2016, 05:53
savage300phd
.411 for the Barnes 300 TSX.