THE ACCURATERELOADING.COM FAVORITE LOADS FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
.45 230 Grn Remington FMJ
 Login/Join
 
new member
posted
I will be using VIHT N320 and UNIQUE

What do you suggest for a starting load?

Powder GRN???

Thank you.
 
Posts: 5 | Location: FL | Registered: 05 December 2005Reply With Quote
One of Us
posted Hide Post
I am guessing this is a std 45 ACP. If so start with 5.5gr of Unique and work up to 7gr


Free men should not be subjected to permits, paperwork and taxation in order to carry any firearm. NRA Benefactor
 
Posts: 1652 | Location: Deer Park, Texas | Registered: 08 June 2005Reply With Quote
one of us
Picture of acsteele
posted Hide Post
I have had pretty good luck with WST, about 4.5gr.


Lt. Robert J. Dole, 10th Mountain, Italy.
 
Posts: 609 | Location: South-central KS | Registered: 22 September 2004Reply With Quote
new member
posted Hide Post
.45 ACP... Yes.

Sorry.

what is WST? And thank you for the info.
 
Posts: 5 | Location: FL | Registered: 05 December 2005Reply With Quote
one of us
Picture of acsteele
posted Hide Post
Sorry I wasn't clear.
one of my good .45acp loads is 4.5grains WST
Winchester Super Target.
Burns very very clean, the inside of the cases are still shiny


Lt. Robert J. Dole, 10th Mountain, Italy.
 
Posts: 609 | Location: South-central KS | Registered: 22 September 2004Reply With Quote
one of us
posted Hide Post
I've had good success with 5.0 grains of Red Dot. Not quite a max load but still fairly stiff.


NRA Life Member
testa virtus magna minimum
 
Posts: 345 | Location: Pittsburgh, PA, USA | Registered: 01 February 2001Reply With Quote
One of Us
posted Hide Post
i use ranier 230's with 11 gr aa#7. they usually leave my rock island 1911 at 950-960 fps if i do my best i can leave a 4" group at 25yds.
 
Posts: 168 | Location: michigan | Registered: 06 August 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia