This one shoots very well in my rifle with a 24 in bbl.
Nosler 210 Part,Varget 56 gr,CCI 200,Lapua brass, 2725 FPS Chrono'd

Thanks for the suggestion, got great accuracy with mollied 210s at 55 grains and 2740 fps from 26" barrel.
Take care

This load worked great for me also. 55.5 gr Varget, CCI BR-2 , 210 NP, 30-06 WW brass formed to 338-06. 1/2 MOA load @ 200 yards. Moderate pressure. Thanks Rob

Used a 338-06 for years, my load was

IMR 4320 @ 54.0
Nosler 210 Part
Fed 210 GM primer
Fed Prem Cases

I shot everything from elk too moose with this load.

This is a great powder for the 338-06. I use it exclusively in my 338-06 AI. With the Hornady 200 gr, I went as far as 61 gr for 3049 fps. With the 210 Nosler, I was getting pressure signs at 57 gr (2944 fps). I use only CCI large rifle primers, no magnum primers needed IMHO. I was very pleased with these results, as they are running right with the factory loads for the 338 WinMag.

I will drop down from both of these loads by a grain for regular working loads. No sense pushing things on an everyday basis. These were just the maxes I found during load development, and I have only worked with these bullets so far. maxman

[ 12-04-2003, 21:37: Message edited by: maxman ]