i'm using same specs as with 200gr SMK to work up a load for my Browning A-Bolt. starting at 68g and using 73.5 as max, any advice here would be appreciated. Thanks
The Powder I chose is Reloader22

A few weeks ago I loaded these up. 71 and 72gr of RL-22 were most promising. 71 was the accuracy load, at about .75" at 100 yards. But the 72gr load gave 1" and that's what I used to load up 20 more rounds for verification. I decided that this would be a hunting bullet so I'd chose the extra grain of powder over .25" MOA. This is using Win Brass and WLRM primers.

I'll try to remember this thread and report back when I shoot up these 20. Good luck with your testing.