Many coyotes have fallen to my favorite load. 32 Gr. IMR 4064, WLR Primer, Remington Brass topped with a 55Gr. Hornady V-Max.

Winchester brass

41.0 grains of H414
CCI250 primer

55 grain bullet is 3750-3800 fps and shoots well.



Cal30

50 gr. Ballistic Tip and 36 gr. of Varget

41gr of Winchester 760 with a Nosler 55gr solid base BT. About 3850fps in my Briley Custom Shop 22-250

55 gr Ballistic tip (Moly'd) and 39 gr. H380 (

38gr H380 under a 50gr B-tip. federal 210 match primer

22-250 28"1:8tw
90grVLD,Moly'd
Rem 154gr.case/Fed 210
36gr. IMR 4350

For coyotes - 41 gr of H380 topped off with Berger 50gr match bullets. Deadly accurate load IME! Winchester LRPrimer + Winchester brass

For varmints..mostly gophers - 38 gr of H380 topped off with 55 gr Sierra Blitz Kings, same primers and brass, turns 'em to red dust!

For Deer...yes I mean Whitetailed deer - 40.5 gr of H380 topped off with 55 gr Sierra Game Kings, same primers and brass...dropped the only deer I have shot with my 22-250 in it's tracks (no longer using this for deer, finally able to afford a .270WSM for big game)

38gr H380 behind a 53 gr. bullet. Very accurate and devstating on chucks!

35grs of Varget pushing a 50gr Speer sp with a CCI200 to fire it up.62nd fox of 2008 keeled over a couple of hours ago from it !

Same as Dan's but I use a Win case and primer, 33 grains of IMR 4064 in a 1-7.5" twist. Best wind shooter I've ever owned all the way back to 1000. Dan's load of 36 gr 4350 is one I worked up to as well but in my rig, the ES was too high (>100 fps).

Beats the pants off my Palma rig.

Mark

22-250 53 gr SMK over 34.5 gr of 4895

experimenting lately, I have found that the starting load of using Benchmark, for bullet weights from 40 to 55 grains, is giving me one hole 5 shot groups at 100 yds!!!

this has proven consistent in all five of the 22.250s I have. from sporter weight barrels to heavy 28 inch custom varmint barrels.

IMPortant tho, this is using CCI and Federal Large Rifle primers..

last week tried the same load utilizing Win Large Rifle primers and the same load gave 3 to 4 inch groups!

Also, REDIAL's load of 33 grains with the 4064, using 75 and 80 grain Match or AMAX bullets ( actually I use 33.3 grains)
in a one in 7 twist custom barrel.. that works consistently accurate for me right out to 800 meters, which is as far as our range has available to shoot...

IMR 4895 with the same charge of 33.3 grains is also just as accuate with those heavier bullet weights.

'15/50V-Max,under the 1-14" assumption.

Just started loading for the 22-250. Mine is a Remington sps Varmint model.
32 grains of 4895 under a 55 grain Nosler BT and CCI primers. Hornaday brass.
I threw one of the 5 shots but the other 4 were in a 1/2 inch group. Need to repeat it though as this was the first load I tried after barrel break in.

my 22-250 likes imr 4895 33gr.with a speer 52 gr. hollow point.