THE ACCURATERELOADING.COM FAVORITE LOADS FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Looking for 8mm-06 loads....
 Login/Join
 
<8mman>
posted
just wondering if anyone had any good 8mm-06 loads to share........
 
Reply With Quote
one of us
Picture of wildcat junkie
posted Hide Post
8mman: I have worked up loads for an 8mm-06 Ackley Improved, P.O. Ackley recommended a 5% increase for A.I. versions so reducing by a like amount +10% would be a good place to start. Nozler 180gr. Ballistic Tip- Norma case, CCI 200 primer, 59gr (slightly compressed) IMR 4064. 2960fps (chronographed)3501ft lbs. Carries 2000ft lbs+ @ 340yds. Devastating on deer, same size exit wound on 60 and 225yd kills, quartering away and broadside respectively. Animals went < 5yds. Haven't done much with 200gr. Partion but 2800fps should be realistic with 63-64gr IMR 4350. I may try Reloader 19, for this bullet as I can't reach preesure signs with IMR 4350. (not enough case capacity) Very efficient round, SD seems to shrink went compreesed loads are used.

[This message has been edited by wildcat junkie (edited 12-24-2001).]

 
Posts: 2440 | Location: Northern New York, WAY NORTH | Registered: 04 March 2001Reply With Quote
one of us
posted Hide Post
8mman I have an 8mm-06 that likes win 06 cases,CCI250 primers and 175 gr Sierra's.My rifle will handle a max load of 65 grs of W760 for a muzzle vel of 3000fps. Suggest starting around 60-61 grs.
 
Posts: 2436 | Location: manitoba canada | Registered: 01 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia