The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Your Favorite Loads - Share Them With Us Need load for 338Go | New | Find | Notify | Tools | Reply | |
| Need load for 338 | Login/Join |
| new member |
I have some 225 gr Barnes X bullets that I need a load for in my 338 Win mag. I can't find any reloading data on line for the X bullets. Anyone have any suggestions? Also, I thought I read somewhere that they like to be "jumped" a bit. Any truth to this? thanks for the info. | ||
|
| one of us |
It's been a while since I loaded any, but I'll check my box of bullets for details and get back to you tommorrow. Remember, forgivness is easier to get than permission. | |||
|
| new member |
Thanks. | |||
|
One of Us |
Barnes #3 Book 225 XFB Fed GM 215 3 preferred powders for accuracy XMR 4350 64.0 to 69.0 (2581 & 2753) Varget 57.0 to 62.0 ( 2511 & 2731 IMR 4350 62.5 to 67.5 (2571 to 2777 ) DuggaBoye-O NRA-Life Whittington-Life TSRA-Life DRSS DSC HSC SCI | |||
|
| one of us |
I use from 67 to 70 gr of AA XMR 4350 with a Fed 215 primer . OAL 3.320=/- seated to the top groove in the bullet. Remember, forgivness is easier to get than permission. | |||
|
| new member |
thanks for the info. | |||
|
One of Us |
Fixing to try it myself so don't know first hand...but I have been told that RL 17 is a good powder in .338 WM ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ J. Lane Easter, DVM A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991. | |||
|
| new member |
I use 72 gr Reloader 19 , CCI lrm primer for 2850 fps out a 26" barrel | |||
|
One of Us |
70.5 grains of IMR-4350, CCI mag primer, WW cases with 225 grain bullet gives me 2800 fps and great accuracy, I'd have to check the OAL but it would be different in your rifle. Good luck. | |||
|
One of Us |
.338 Winchester Magnum: 74.5 gr IMR 4350, CCI 250, 225 gr TTSX bullet, Winchester Cases, 3,000 fps (measured over an Oehler chronograph) 27" barrel. Data came from Speer #12 manual. ----------------------------------------------------- Do not answer a fool according to his folly, or you yourself will be just like him. Proverbs 26-4 National Rifle Association Life Member | |||
|
| One of Us |
Tried x's in my 338 Win Mag a long long time ago and after 5 different powders and 20 different loads it came out to 3"to 6 1/2 " at 100yrds. The gun would do 1 1/4" all day with BT's and 200gr Hor.Sp at 100yds and 3/8" with 275gr Speers at 50yds. Stock up on copper remover. | |||
|
| one of us |
Fat Albert I'm guessing if it was a long long time ago you used original barnes x's. The new TSX's are a whole new ball game as far as accuracy and minimal copper fouling. | |||
|
| One of Us |
WW case Fed 215 210 NP 72g-Imr 4350 2900 over a chrony beta | |||
|
| One of Us |
72.0 gr of IMR-4350, 225 gr X bullet, Win brass, Fed GM mag primer. The load was safe in my Tikka, but work up to it in yours. Very accurate - 5/8 to 3/4-inch, 3-shot groups. | |||
|
| One of Us |
my best with the 225's was with Norma MRP 74grs with Win LR Mag primers in WW cases. COL was 3.392 in my Mdl 70, Very accurate. Also had good luck, but not quite as accurate with 75gr of IMR7828. This load was compressed to much for my liking but didn't show high pressure in my 338 Ruger No. 1 ut was excesive in the mdl 70. Every rifle is different so be careful! | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia