Ditto Zero's load (23.0 H110, I use magnum primers). I used to load 21.5 gr H110 until I got Hodgdon's manual, they warn against downloading H110 (23.0 is minimum recommended for 240 gr JHP/JSP, 24.0 is max).
Had extraction problems with 2400.
Bill
Posts: 1169 | Location: USA | Registered: 23 January 2002
The loads I use in my 7-1/2" Ruger SRH 44mag. is 320gr. WFNGC from Cast Performance using 21.0grs. of WW296 with a CCI 350mag. large pistol primer and Federal cases. I get 1300fps. with an extreme spread of 14fps. This load shows no signs of high pressure in my gun. This is my heavy timber elk load. Target and small game load is a 200gr. Laser Cast RN with 7.5grs. of Universal Clays with a CCI 300 large pistol primer. This load is traveling 750fps. I have heard a Hornady 240gr.xtp's with 24.7grs. of WW296 and a CCI 350mag. large pistol primer works really good on deer. I haven't tried them yet.
240 grain xtp CCI mag primer 24.5 grains of H110 in a S&W 29 with 8 3/8 you will find a little case streach but nothing to awfull better use a good crimp