THE ACCURATERELOADING.COM BIG BORE FORUMS


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
CZ 550 Magnum Login/Join
 
One of Us
posted
Hi all,
I am chasing a factory front sight band to suit a CZ 550 Magnum barrel in 458WM. Just the bare band will be sufficient.
I think they're all the same diameter, no matter what chambering, but, unsure.

Also, CZ do a 1/8" front sight bead on their custom shop big bores in 450 Rigby, 500 Jeffery and 505 Gibbs.
Can anyone point me in the right direction to getting a few of these, please.

Thanks all.

Cheers.
tu2
 
Posts: 684 | Location: N E Victoria, Australia. | Registered: 26 February 2009Reply With Quote
One of Us
posted Hide Post
I have boxes full of the banded sights with hoods but no 1/8" beads. The largest diameter factory bead I have is .100", and only one of them. Email Harlan at Triple River Gunsmithiths (CZ Custom Shop) for the beads. I'll send you the banded sight base for postage. In fact, I'll send you several as they are piling up around here. You can pass them out to your mates.
 
Posts: 1253 | Location: Montana | Registered: 18 February 2007Reply With Quote
One of Us
Picture of MJines
posted Hide Post
Wayne, you are a solid fellow . . . I do not care what Paul Smith says. Big Grin


Mike
 
Posts: 21992 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
I don't know about solid, but my son calls me thick.
Watch out for that Paul Smith fellow. Wink
 
Posts: 1253 | Location: Montana | Registered: 18 February 2007Reply With Quote
One of Us
Picture of MJines
posted Hide Post
The Baron of Birmingham? Cool


Mike
 
Posts: 21992 | Registered: 03 January 2006Reply With Quote
One of Us
Picture of Nakihunter
posted Hide Post
Yes Wayne is a true champion!

Helped me with my 416 Rigby a couple of years ago. I got the bolt smoothed out following his instructions.

Then Wayne sent me a replacement foresight and several rear sights at very nominal cost with none of the import export BS as he has a special permit.



quote:
Originally posted by MJines:
Wayne, you are a solid fellow . . . I do not care what Paul Smith says. Big Grin


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11420 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Bitterroot:
I have boxes full of the banded sights with hoods but no 1/8" beads. The largest diameter factory bead I have is .100", and only one of them. Email Harlan at Triple River Gunsmithiths (CZ Custom Shop) for the beads. I'll send you the banded sight base for postage. In fact, I'll send you several as they are piling up around here. You can pass them out to your mates.

Hi Wayne, I will gladly take up your offer. You are a scholar and a gentleman.
Just let me know how to pay for postage.
I will take as many as you wish to send me, in reason, of course.
Thanks for the info on the sight bead. I will email them next week. tu2

Regards.
Tony.

PS: I have been away hunting for a few days, sorry for the late reply all.
 
Posts: 684 | Location: N E Victoria, Australia. | Registered: 26 February 2009Reply With Quote
One of Us
Picture of PSmith
posted Hide Post
quote:
Originally posted by MJines:
The Baron of Birmingham? Cool


More like the The Schmoe of Birmingham.


Paul Smith
SCI Life Member
NRA Life Member
DSC Member
Life Member of the "I Can't Wait to Get Back to Africa" Club
DRSS
I had the privilege to fire E. Hemingway's WR .577NE, E. Keith's WR .470NE, & F. Jamieson's WJJ .500 Jeffery
I strongly recommend avoidance of "The Zambezi Safari & Travel Co., Ltd." and "Pisces Sportfishing-Cabo San Lucas"

"A failed policy of national defense is its own punishment" Otto von Bismarck
 
Posts: 2545 | Location: The 'Ham | Registered: 25 May 2007Reply With Quote
One of Us
posted Hide Post
Tony, PM sent.
Cheers,
 
Posts: 1253 | Location: Montana | Registered: 18 February 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia