1135!!!
540 jeff
595 gibbs

Jeffe

Glad to see 1000 was reached. Naturally now want to know a probable delivery date. Weeks? Months? Am glad that Jeffe put this together and don't want to be a pest about delivery, just looking for a general idea.

Gibbs beats Jeffery, who would have guessed?

NOW I have an excuse to get me one of those MTM double-decker 20-gauge boxes and pull out the top deck and fill it up with rounds and just STARE at it.... heh, heh, heh...

I am tallying, as one person wrote me under the wire, and I am waiting a couple days, but this will NOT impact our deal.

As I asked when I started this, it could take awhile. Dieter told me 2.5 weeks ago that this could be may for the 500 and june for the 505, and we'll do one shipping cost.

My poor 20 pieces of jeffe will be totally wore out by then.

So, when I can get the details for PLACING the final order, I'll deposit the checks/MOs (they are in my gunsafe) and we'll move on.

Thanks guys!!
jeffe

This is offically closed, as I am in payment discussions with Dieter.

1135!!!
540 jeff
595 gibbs

Jeffe

Thanks for all that you are doing Jeffe,
DMC

I have all the details FINALLY worked out.
The funds will be sent today for our brass.

No real delay in delivery, as we are dependant on his runs for delivery.

I'll contact everyone when we get closer

jeffe

Note for Dieter

Dear Jeffe,
your cases planed to finish end of June.
Best regards
Dieter

jeffe

Dated 10/01/03

Dear Jeffe,
the .500 Jeffery cases get ready next week. We send them via air parcel post.

Best regards
Dieter

Promised in June, July, August, End of September... and 505's due in october.

no frickin way I'll ram rod another order, 4 months LATE is the end of my tolerence... If he had SAID 7 months, I might have blown it off....

I'll have the 500 jeffery orders out within a week of getting the brass....

jeffe

Glad to hear of some progress on these. The folks at Huntington's told me they have been waiting over two years for .450 #2 brass.

can you make 450 ne#2 outta 470 ne?

jeffe

Jeffeoso,
Don't let it get to you.
Thanks for your efforts.
DMC

jeffe:
I was just going to use the one box of Bertram brass I have until Huntington's got some in. Had not really looked at what else 450 NE #2 can be formed from. 470 is a bit too short.
By the way, I certainly echo DMC's comment above!

[ 10-02-2003, 19:02: Message edited by: Copper Country ]

Jeffe--The 470 brass would have to be sized
down .008 at base.Could fix them on my case lathe.
They would be short, but if you expanded them
out to a straight sides first, then take the
.008 of of base closes to rim, and resize with
an open top sizing die(no shoulder in die) to
set the base dimensions, they will lengthen a bit.
You would then put them in regular sizing die and
load.Won't have to trim for length even if fired
50 times.470 base is .572---450 #2 base is .564.
470 nominal length is 3.25--450 #2 length is 3.5.
And they will be just as strong as 470's.The secret is to remove the small amount of brass needed to get down to size,just ahead of rim,
rather than try to push it against rim.Ed.

Jeffe,
Ditto DaveC's support. We appreciate you doing the leg work and frustration. One thing these big guns,(and double rifles),have taught us is patience.
Thanks again
Ron

Jeffe,

Have the goodies showed up yet? I thoght manyana was a Spanish word, not German

For the price, and Hornbears reputation, it should be worth the wait. Then again, I as you would go 500 A2 on another go around. But, with the investment in dies and brass, and pre-chambered Lothar Wolther barrels, a second 500J does become tempting.

I'm having Mr Ricks assemble a 458 lott for me, need something common I can throw in an existing stock, and get bullets and brass locally.

Hey Paul, and all
with Deiter's track record....
10/1 said "next week" which means mebbe the 10th... 2 working days to box the 500 jeffery , and 10-14 days shipping...

Holloween presents?
I frickin hope... I've worn out 10 of my bertram and 6 of deiter's, that i bought from huntingtons...
jeffe

Update from Dieter 10/26
Dear Jeffe,
the .500 Jeffery cases were shiped last thuesday. Normally air parcel post takes 3 to 5 days. We start wiith .505 Gibbs production. They are ready beginn of December.

Best regards
Dieter

Jeffe,

thanks much for bird dogging this. It sounds like light is finally at the end of the tunnel.

regards,

steve

Jeffe,

Great news. Definitely worth the wait.

YEEEEPPPPPIEEE!!!!

The 500 jeffery brass is IN!!!

please email me jlsmith2@aol.com and let's talk shipping/insurance and let me verify your shipping address, as some of ya might have moved.

I goofed on the shipping, and only included TO the US. If you want, I'll eat the mistake. it's only 8 to 14 bucks each, so help a brother out?

<counting brass>
jeffe

Jeffe,

Did you get my email? Waiting for a reply with your address(I lost the email with it) and my shpping $. Let me know.

Everyone,
One person has not contacted me, and he was a sneak in, at the last second, on the 500.

I have shipped all the others yesterday, and I'll email you with the shipping.

David,
Sorry about that... i thought i replied, but memory is the second thing to go...\

jeffe

Does anyone have 5-10 of the Gibbs and/or Jeffery they would be willing to sell/trade? You can reach me on e-mail, AR Private Message, or here.

Thanks,
BMG

Jeff,
I just received the .500 J brass, all in good shape.
Thank you for your efforts.

Anyone want to buy 20 new .500 Jeffrey (Bertram) cases real cheap?

Check your e-mail


BMG

i'll take 1/2
jeffe

I just received my portion of the 500 J brass. All in perfect shape and now safely stowed in my loading room!

Gents,
as you receive your brass, please check your PMs
jeffe

Now I'm just looking for some 505 Gibbs, any Mfgr is fine.

Thanks,
Matt