The Accurate Reloading Forums
Type A Mauser in 404 Jeff

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/966104168

08 May 2008, 21:02
ilw
Type A Mauser in 404 Jeff
Hi

I have had the itch to get a 375 plus gun for a while and I have come across this gun.

I have not seen it but I am told that the stock was redone and the steel reblued.

Now the bad news apparently the stock was sanded aggressively .. even the checkering.

AND the bluing is a mess as well.

On the up side the bore is 100%.

So I need some advice ( I realize pictures would be helpful ... the current owner does not have computer acess)

Worst case senerio I have to restock it and reblue it ... Is it worth it?

It is my (limited) understanding that this is a good gun. Do I just use it as a shooter and over look the faults or do I repair it and have a classic?

Any and all advice is welcome.

Thanks gentlemen.
08 May 2008, 21:20
450/400
Sounds like a proper candidate for restocking and bluing...
08 May 2008, 21:27
tiggertate
A bad re-blue isn't harmfull in itself unless the gun was over-polished on a power wheel. I've seen some nice guns ground down so far they can never be brought back to decent condition. In that case it would be a shooter as-is.

If it is just a matter of poor application of the bluing, the corners are still sharp and the flats are still flat, you have a candidtae for some improvements.


"Experience" is the only class you take where the exam comes before the lesson.
08 May 2008, 21:30
Masterifleman
A lot would depend on the asking price????????????


"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
08 May 2008, 22:41
ilw
I beleive it has been over polished.

What would a shooter be worth?
08 May 2008, 23:01
tiggertate
A matter of degrees, really. It sounds ruined as a restorable classic (just a guess, having not seen it). That makes it worth less to me than maybe to you. $500 would be my tops.


"Experience" is the only class you take where the exam comes before the lesson.
09 May 2008, 17:47
ilw
Thanks for the comments.

I just realized that I forgot to mention the gun was also made by Jeffery.
10 May 2008, 00:09
jeffeosso
then it is a crime that it was ruined nad is a $500 shooter...
the jeffery part only comes into play if it is reasonably as it left the factory ... to be over sanded, reshaped, over polished, and badly blued...

it's like jame's dean 356 .. it has NIL value as a porsche
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
10 May 2008, 01:07
tiggertate
I don't mean to say that is its only value. This is a tough crowd in that regard. It could bring a lot more on one of the auction sites.


"Experience" is the only class you take where the exam comes before the lesson.
10 May 2008, 04:23
ilw
Thanks for the input.

Yes maybe a tough crowd but a very knowledgeable crowd too.

Thanks for the help!
10 May 2008, 06:01
GSP7
Sanded stock and over polished metal on type A Mauser! That is a crime! Frowner
12 May 2008, 06:18
ALF
/
12 May 2008, 19:00
ilw
Alf

You are correct!

PM sent