The Accurate Reloading Forums
.500 A2 loads with Varget or Hodgen Powders

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4711043/m/9591076861

22 December 2011, 09:17
PC
.500 A2 loads with Varget or Hodgen Powders
Does anyone have any loads to share using either Varget or Hodgen Powders, especially interested in 570 gr woodleigh data.

I'd also be interested if H4350 is any good in the 500 a2 or is it to slow with 570gr woodleigh softs. I am thinking Varget might work well.
22 December 2011, 13:28
Sid-
I do not own one but maybe this will help. I would love to shoot the beast one day tho. flame

http://www.reloadersnest.com/f...ge.asp?CaliberID=166
22 December 2011, 21:45
Robgunbuilder
PC- My records show 113 gr of Rl-15 with the 570 gr Woodleigh with fed 215 primers, crimped at the cannalure.-Rob


Never underestimate the power of stupid people in large numbers to do incredibly stupid things- AH (1941)- Harry Reid (aka Smeagle) 2012
Nothing Up my sleeves but never without a plan and never ever without a surprise!
22 December 2011, 22:36
PoppaW
I have used RL15 up to 110gr with 550gr bullets. I have not found any need for another powder as my 510 Wells(very close to 500A2) is not scoped. It seems a better shooter than me. I have used 95-110gr with 450's 535's and 550's. I have no 570's and have 24 600 Barnes originals I'm saving once I'm shooting better at 50+ yards


WOODY
Everyone is allowed an opinion, even if its wrong.
22 December 2011, 23:23
Michael Robinson
I have used H4350, but it requires about 15-20 grains more powder (depending on the lots), and more powder compression than I like, to achieve the same velocities as RL-15.

Also, the maximum velocity I have been able to achieve with H4350 is around 2,300 fps, as opposed to 2,600 fps with RL-15.

I don't use Woodleighs in my A2 anymore. Only Barnes.

I compress my RL-15 loads as it is and prefer high end velocity, so I don't use H4350 anymore either.


Mike

Wilderness is my cathedral, and hunting is my prayer.
23 December 2011, 00:46
PC
Thankyou folks,

I dont think my .500 A2 is far away it will only have a 20" barrel and then break, the rifle will not be for the prists on here.............I've opted to go for the "tactical" style Big Grin it is being built on a Stiller Tac 338 Ill post a pic or two when it arrives.

What velocity do you think I wil be abale to aacheive with a 20" barrel and the 570 woodleigh ?

I remember reading something one here where a knowledgable perosn stated that a .500 A2 could function well with a 19" tube, but I could not find the article.

I might create a new topic for these questions. It seems Varget, 2206H or the more expensive RL-15 will be the way to go.
23 December 2011, 09:19
Bwana_500
Hey PC

Please keep us in the loop on your build and load development. I should have my 500-A2 sometime next year.